Toyota Tacoma (2015-2018) Service Manual: Dtc Check / Clear

Toyota Tacoma (2015-2018) Service Manual / Differential / Differential System(w/ Rear Differential Lock) / Dtc Check / Clear

DTC CHECK / CLEAR

1. CHECK DTC

(a) Check the DTCs.

(1) Turn the ignition switch off.

(2) Connect the Techstream to the DLC3.

(3) Turn the ignition switch to ON.

(4) Turn the Techstream on.

(5) Read the DTCs following the prompts on the Techstream screen. Enter the following menus: Powertrain / Four Wheel Drive / Trouble Codes.

(6) Check the details of the DTCs (See page 2. CLEAR DTC ).

2. CLEAR DTC

(a) Clear the DTCs.

(1) Turn the ignition switch off.

(2) Connect the Techstream to the DLC3.

(3) Turn the ignition switch to ON.

(4) Turn the Techstream on.

(5) Operate the Techstream to clear the DTCs. Enter the following menus: Powertrain / Four Wheel Drive / Trouble Codes.

(6) According to the display on the Techstream, select the trouble code data display with the clear button.

Terminals Of Ecu

TERMINALS OF ECU 1. CHECK 4 WHEEL DRIVE CONTROL ECU Text in Illustration *a Component with harness connected (4 Wheel Drive Control ECU) - - ...

Fail-safe Chart

FAIL-SAFE CHART 1. FAIL-SAFE OPERATION AND DEACTIVATION CONDITION DIFFERENTIAL SYSTEM (w/ Differential Lock) DTC No. Fail-safe Operation Fail-safe Deactivation Cond ...

Other materials:

Front passenger occupant classification system
Your vehicle is equipped with a front passenger occupant classification system. This system detects the conditions of the right front passenger seat and activates or deactivates the devices for the front passenger. 1. SRS warning light 2. Front passenger’s seat belt reminder light 3. AIR ...

Ignition Switch
Components COMPONENTS ILLUSTRATION Removal REMOVAL PROCEDURE 1. REMOVE LOWER STEERING COLUMN COVER (a) Remove the 2 screws. (b) Disengage the 2 claws and remove the lower steering column cover. 2. REMOVE IGNITION OR STARTER SWITCH ASSEMBLY (a) Disconnect the connector. (b) Disen ...

Data Signal Circuit between Radio Receiver and Extension Module
DESCRIPTION The stereo component tuner assembly sends the image data signal to the radio and display receiver assembly via this circuit. WIRING DIAGRAM PROCEDURE 1. CHECK NO. 1 NAVIGATION WIRE (a) Disconnect the R33 radio and display receiver assembly connect ...