DESCRIPTION
When a new millimeter wave radar sensor assembly is installed, it receives vehicle specification information (destination, steering wheel position, 2WD or 4WD, etc.) from the main body ECU (multiplex network body ECU) and stores the information.
DTC C1A02 is stored when the millimeter wave radar sensor assembly cannot store the vehicle specification information from the main body ECU (multiplex network body ECU).
DTC No. |
Detection Item |
DTC Detection Condition |
Trouble Area |
MIL |
---|---|---|---|---|
C1A02 |
Vehicle Information Not Obtained |
While the ignition switch is ON and the dynamic radar cruise control system is operating, the millimeter wave radar sensor assembly cannot store the vehicle specification information for approximately 0.1 seconds or more. |
Millimeter wave radar sensor assembly |
Does not come on |
CAUTION / NOTICE / HINT
NOTICE:
Click here
Click here
PROCEDURE
1. |
CHECK FOR DTC (RADAR CRUISE 2) |
(a) Clear the DTCs.
Click here
(b) Make sure that the DTC detection conditions are met.
HINT:
If the detection conditions are not met, the system cannot detect the malfunction.
(c) Check for DTCs.
Click here
Result |
Proceed to |
---|---|
DTC C1A02 is not output |
A |
DTC C1A02 is output |
B |
A |
USE SIMULATION METHOD TO CHECK |
B |
REPLACE MILLIMETER WAVE RADAR SENSOR ASSEMBLY |
Active head restraints (Access Cab and Double Cab models only)
When the occupant’s back presses against the seatback during a rear-end collision,
the head restraint moves slightly forward to help reduce the risk of whiplash on
the seat occupant.
■Active head restraints
Even small forces applied to the seatback may cause the head restraint to mov ...
Multi-terrain Select Switch
Components
COMPONENTS
ILLUSTRATION
Removal
REMOVAL
PROCEDURE
1. REMOVE MULTI-TERRAIN SELECT SWITCH (DRIVE MONITOR SWITCH)
(a) Disengage the 2 claws to remove the multi-terrain select switch (drive
monitor switch).
Inspection ...
System Description
SYSTEM DESCRIPTION
1. SEAT BELT WARNING SYSTEM DESCRIPTION
(a) Seat belt warning light operation for driver seat belt:
The seat belt warning light on the combination meter assembly illuminates, blinks
or turns off in accordance with the driver seat belt state, vehicle speed, shift
lever posit ...