Toyota Tacoma (2015-2018) Service Manual: Theft Deterrent System is not Unset when Engine is Running

Toyota Tacoma (2015-2018) Service Manual / Theft Deterrent / Theft Deterrent System / Theft Deterrent System is not Unset when Engine is Running

DESCRIPTION

The theft deterrent system is unset when the IG signal and engine speed signal are input to the main body ECU (multiplex network body ECU) for 2 seconds or more continuously.

The engine speed signal is sent from the ECM to the main body ECU (multiplex network body ECU). For this reason, if there is an abnormality in an ECU or wire harness, the system may not function correctly.

WIRING DIAGRAM

CAUTION / NOTICE / HINT

NOTICE:

Before replacing the main body ECU (multiplex network body ECU), refer to Registration (See page ).*1
- *1: w/ Smart Key System
Inspect the fuses for circuits related to this system before performing the following procedure.

PROCEDURE

1.	REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)

(a) Replace the main body ECU (multiplex network body ECU) with a new one (See page ).

END

Theft Deterrent System cannot be Set or Unset

DESCRIPTION When the ignition switch is turned off and all doors and the engine hood are closed, the theft deterrent system is set when doors are locked by wireless operation*1, key linked operat ...

Theft Deterrent System Unexpectedly Sets Itself

DESCRIPTION A situation in which the theft deterrent system unexpectedly sets itself can be caused when the main body ECU (multiplex network body ECU) cannot detect whether a door is open or clos ...

Other materials:

Cautions & Notices
CAUTION This is a warning against anything which may cause injury to people if the warning is ignored. You are informed about what you must or must not do in order to reduce the risk of injury to yourself and others. NOTICE This is a warning against anything which may cause damage to the vehi ...

Main Switch Signal Circuit
DESCRIPTION When the wireless charger main switch (mobile wireless charger switch) is turned on, this circuit sends an on signal to the mobile wireless charger cradle assembly using the power supplied to the wireless charger main switch (mobile wireless charger switch). WIRING DIAGRAM CAU ...

Removal
REMOVAL CAUTION / NOTICE / HINT HINT: When removing the name plates or stripe tapes, heat the vehicle body or tail gate and name plates or stripe tapes using a heat light. Heating Temperature Item Temperature Vehicle Body or Tail Gate 40 to 60 ...