Toyota Tacoma (2015-2018) Service Manual: Disassembly
DISASSEMBLY
CAUTION / NOTICE / HINT
CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
PROCEDURE
1. REMOVE REAR SEAT CUSHION BAND
|
(a) Remove the screw and rear seat cushion band. |
|
2. REMOVE REAR SEAT HEADREST HOLDER
|
(a) Using a screwdriver with its tip taped in protective tape, disengage the 4 claws to remove the 2 rear seat headrest holders. Text in Illustration
|
|
3. REMOVE REAR SEAT CUSHION HINGE SUB-ASSEMBLY
|
(a) Remove the 2 bolts and 2 rear seat cushion hinge sub-assemblies. |
|
4. REMOVE REAR SEAT CUSHION FRAME SUB-ASSEMBLY
|
(a) Disengage the hook to remove the rear seat cushion frame sub-assembly. |
|
5. REMOVE SEPARATE TYPE REAR SEAT CUSHION COVER
|
(a) Remove the 6 hog rings and separate type rear seat cushion cover. |
|
6. REMOVE REAR SEAT HEADREST ASSEMBLY
(a) Disengage the 2 lock buttons of the 2 rear seat headrest supports to remove the rear seat headrest assembly.
7. REMOVE REAR SEATBACK BOARD SUB-ASSEMBLY
|
(a) Remove the 2 screws. |
|
(b) Disengage the 4 claws to remove the rear seatback board sub-assembly.
8. REMOVE REAR SEAT HEADREST SUPPORT
|
(a) Disconnect the 2 rear seatback cover straps. |
|
|
(b) Disengage the 2 hooks. |
|
|
(c) Disengage the 4 claws and remove the 2 rear seat headrest supports. |
|
9. REMOVE REAR SEATBACK FRAME SUB-ASSEMBLY
|
(a) Disengage the 2 hooks to remove the rear seatback frame sub-assembly. |
|
10. REMOVE REAR SEATBACK LOCK ASSEMBLY
|
(a) Remove the 2 bolts and rear seatback lock assembly. |
|
11. REMOVE REAR SEAT LOCK HANDLE
|
(a) Remove the rear seat lock handle from the rear seatback lock. |
|
12. REMOVE SEPARATE TYPE REAR SEATBACK COVER
|
(a) Disengage the 2 hook-and-loop fasteners. |
|
(b) Remove the 2 hog rings and separate type rear seatback cover.
Removal
REMOVAL
PROCEDURE
1. REMOVE REAR SEAT CUSHION ASSEMBLY
(a) Remove the 2 bolts and rear seat cushion assembly.
2. REMOVE REAR SEATBACK HINGE COV ...
Installation
INSTALLATION
PROCEDURE
1. INSTALL REAR SEATBACK CENTER HINGE SUB-ASSEMBLY
(a) Install the rear seatback center hinge sub-assembly with the 2 bolts.
Torque:
30 N·m {306 kgf·cm, 22 ft·lbf}
2. ...
Other materials:
Lost Communication with HMI-LAN (B150A)
DESCRIPTION
The combination meter assembly receives a text data signal from the navigation
receiver assembly or radio and display receiver assembly via local bus communication.
Based on this signal, navigation system information is displayed on the multi-information
display.
This DTC is store ...
Luggage compartment features
Behind the rear seat (Double
Cab models only)
1.Cargo net hooks (vehicles with sub woofer)
2.Grocery bag hooks
3.Flashlight holder
4.Storage boxes
Deck
1. Auxiliary boxes
2. Tie-down cleats
3. Deck hooks
Auxiliary boxes
Left side
1. Turn the knob counterclockwise.
2. Open the ...
ABS Control System Malfunction (43)
DESCRIPTION
This DTC is output when the VSC system detects a malfunction in the ABS system.
When DTC 43 is stored, there is no malfunction in the skid control ECU (master cylinder
solenoid).
DTC No.
DTC Detecting Condition
Trouble Areas
43
...
