Components
COMPONENTS
ILLUSTRATION
Inspection
INSPECTION
PROCEDURE
1. INSPECT LEVEL WARNING SWITCH ASSEMBLY
HINT:
This check should be performed with the windshield washer motor and pump assembly installed on the washer jar.
(a) Fill the washer jar with washer fluid.
(b) Measure the resistance according to the value(s) in the table below. Standard Resistance:
HINT: *: The level warning switch assembly begins operating when the fluid volume is 600 to 800 cc (36.6 to 48.8 cu.in.) depending on the vehicle condition. Text in Illustration
If the result is not as specified, replace the level warning switch assembly. |
|
Installation
INSTALLATION
PROCEDURE
1. INSTALL LEVEL WARNING SWITCH ASSEMBLY
(a) Install the level warning switch assembly. |
|
(b) Connect the connector.
(c) Connect the washer hose to the windshield washer motor and pump assembly.
2. INSTALL WASHER JAR ASSEMBLY
3. ADD WASHER FLUID
4. INSTALL HEADLIGHT ASSEMBLY RH
HINT:
Use the same procedure as for the LH side. (See page )
Removal
REMOVAL
PROCEDURE
1. REMOVE HEADLIGHT ASSEMBLY RH
HINT:
Use the same procedure as for the LH side. (See page )
2. SEPARATE WASHER JAR ASSEMBLY
3. DRAIN WINDSHIELD WASHER FLUID
4. REMOVE LEVEL WARNING SWITCH ASSEMBLY
(a) Disconnect the connector. |
|
(b) Remove the level warning switch assembly as shown in the illustration.
Communication Error from ECM to VSC Invalid Serial Data Received (P163181)
DESCRIPTION
The ECM sends signals such as dynamic radar cruise control operation signals,
brake operation demand signals and buzzer operation demand signals to the skid control
ECU (master cylinder solenoid)*1 or skid control ECU (brake actuator assembly)*2
when the dynamic radar cruise contr ...
Entune Audio
Operations such as listening to audio, using the hands-free phone, confirming
vehicle information and changing multimedia system settings are started by using
the following buttons.
Multimedia system operation buttons
button
Press this button to access the Bluetooth® hands-free system.
...
System Description
SYSTEM DESCRIPTION
1. WIRELESS CHARGER FUNCTION OUTLINE
(a) The wireless charging system enables Qi-compliant* rechargeable devices,
such as a cellular phone, to be recharged by merely placing it on the charging area
of the mobile wireless charger cradle assembly on the console panel.
HINT:
...