Toyota Tacoma (2015-2018) Service Manual: Voice is not Recognized

Toyota Tacoma (2015-2018) Service Manual / Navigation / Multi Info Display / Navigation System / Voice is not Recognized

PROCEDURE

1.	CHECK CONDITION

(a) Check if the system voice recognition level is low when recognizing a particular voice.

Result

Result	Proceed to
System voice recognition level is low with any voice	A
System voice recognition level is low only for a particular voice	B

HINT:

System voice recognition level varies depending on voice and pronunciation. This is not a malfunction.
To achieve better voice recognition, ask the customer to watch the tutorial or perform the voice training to train the system.

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

END

Route cannot be Calculated

PROCEDURE 1. SET DESTINATION (a) Set another destination and check if the system can calculate the route correctly. OK: Route can be correctly calculated. ...

Cellular Phone Registration Failure, Phone Directory Transfer Failure

PROCEDURE 1. CHECK OPERATION (a) Place the cellular phone close to the navigation receiver assembly. (b) Check if the cellular phone can be registered. OK: The ce ...

Other materials:

Automatic Disconnecting Differential Motor Limit Switch Circuit (P17A4)
DESCRIPTION When the A.D.D. actuator switches between 2WD and 4WD, the DL1 and DL2 terminals of the limit switch and ADD terminal of the A.D.D. position switch change to one of the following ON/OFF combinations listed in the table below. Terminal In 2WD Switchi ...

Manual Shifting Test
MANUAL SHIFTING TEST 1. PERFORM MANUAL SHIFTING TEST HINT: Using this test, it can be determined whether a problem is in an electrical circuit or if it is a mechanical problem in the transmission. If any abnormalities are found in the following test, the problem is in the tran ...

Pattern Select Switch Power Mode Circuit
DESCRIPTION The ECM memory contains the programs for the normal and PWR shift patterns. By following the programs corresponding to the signals from the pattern select switch assembly, park/neutral position switch and other various sensors, the ECM switches the shift solenoid valves on and off, ...