TERMINALS OF ECM
1. ECM
HINT:
The standard voltage between each pair of ECM terminals is shown in the table below. In the table, first follow the information under "Condition". Look under "Terminal No. (Symbol)" for the terminals to be inspected. The standard voltage between the terminals is shown under "Specified Condition".
Use the illustration above as a reference for the ECM terminals.
Terminal No. (Symbol) |
Wiring Color |
Terminal Description |
Condition |
Specified Condition |
---|---|---|---|---|
E18-9 (SP2O) - E17-3 (E1) |
L - W-B |
Transmission revolution sensor (SP2) signal |
Vehicle driving |
Pulse generation |
E18-10 (SP2B) - E17-3 (E1) |
G - W-B |
Power source for sensor (fixed voltage) |
Ignition switch ON |
11 to 14 V |
E18-12 (SL) - E17-3 (E1) |
R - W-B |
Shift solenoid valve SL signal |
All gears |
11 to 14 V |
E18-15 (NSW) - E17-3 (E1) |
V - W-B |
Park/neutral position switch signal |
Ignition switch ON and shift lever in P or N |
Below 1 V |
Ignition switch ON and shift lever not in P or N |
11 to 14 V |
|||
E19-2 (SLU+) - E19-1 (SLU-) |
P - L |
Shift solenoid valve SLU signal |
2nd, 3rd, 4th, 5th or 6th gear (Flex lock-up on) |
Pulse generation |
E19-5 (SLT+) - E19-4 (SLT-) |
LG - Y |
Shift solenoid valve SLT signal |
Engine idling |
Pulse generation |
E19-7 (SL2+) - E19-6 (SL2-) |
GR - BE |
Shift solenoid valve SL2 signal |
4th, 5th or 6th gear |
Pulse generation |
E19-9 (SL1+) - E19-8 (SL1-) |
R - V |
Shift solenoid valve SL1 signal |
1st, 2nd, 3rd or 4th gear |
Pulse generation |
E19-13 (SL4+) - E19-12 (SL4-) |
SB - BE |
Shift solenoid valve SL4 signal |
3rd or 5th gear |
Pulse generation |
E19-16 (SL3+) - E19-15 (SL3-) |
B - W |
Shift solenoid valve SL3 signal |
2nd or 6th gear |
Pulse generation |
E19-17 (SFTU) - E17-3 (E1) |
SB - W-B |
Up-shift position switch signal |
Ignition switch ON and shift lever in S |
11 to 14 V |
Ignition switch ON and shift lever in "+" (Up-shift) |
Below 1 V |
|||
E19-19 (NTO) - E17-3 (E1) |
W - W-B |
Transmission revolution sensor (NT) signal |
Engine idling |
Pulse generation |
E19-20 (THO1) - E19-21 (ETHO) |
P - V |
No. 1 ATF temperature sensor signal |
No. 1 ATF temperature: 115°C (239°F) or higher |
Below 1.5 V |
E19-22 (THO2) - E19-21 (ETHO) |
L - V |
No. 2 ATF temperature sensor signal |
No. 2 ATF temperature: 115°C (239°F) or higher |
Below 1.5 V |
E19-24 (N) - E17-3 (E1) |
G - W-B |
N shift position switch signal |
Ignition switch ON and shift lever in N |
11 to 14 V |
Ignition switch ON and shift lever not in N |
Below 1 V |
|||
E19-25 (P) - E17-3 (E1) |
GR - W-B |
P shift position switch signal |
Ignition switch ON and shift lever in P |
11 to 14 V |
Ignition switch ON and shift lever not in P |
Below 1 V |
|||
E19-27 (SFTD) - E17-3 (E1) |
R - W-B |
Down-shift position switch signal |
Ignition switch ON and shift lever in S |
11 to 14 V |
Ignition switch ON and shift lever in "-" (Down-shift) |
Below 1 V |
|||
E19-29 (NTB) - E17-3 (E1) |
Y - W-B |
Power source for sensor (fixed voltage) |
Ignition switch ON |
11 to 14 V |
E19-30 (S) - E17-3 (E1) |
B - W-B |
S shift position switch signal |
Ignition switch ON and shift lever in S, "+" or "-" |
11 to 14 V |
Ignition switch ON and shift lever not in S, "+" or "-" |
Below 1 V |
|||
E20-8 (R) - E17-3 (E1) |
V - W-B |
R shift position switch signal |
Ignition switch ON and shift lever in R |
11 to 14 V |
Ignition switch ON and shift lever not in R |
Below 1 V |
|||
E20-13 (CANH) - E17-3 (E1) |
B - W-B |
CAN communication line |
Ignition switch ON |
Pulse generation |
E20-14 (CANL) - E17-3 (E1) |
W - W-B |
CAN communication line |
Ignition switch ON |
Pulse generation |
E20-18 (D) - E17-3 (E1) |
SB - W-B |
D shift position switch signal |
Ignition switch ON and shift lever in D, S, "+" or "-" |
11 to 14 V |
Ignition switch ON and shift lever not in D, S, "+" or "-" |
Below 1 V |
|||
E21-14 (PWMS) - E17-3 (E1) |
P - W-B |
Pattern select switch signal |
Ignition switch ON and pattern select switch pushed |
Below 1 V |
Ignition switch ON and pattern select switch not pushed |
11 to 14 V |
Installation
INSTALLATION
PROCEDURE
1. INSTALL REAR DOOR GLASS SUB-ASSEMBLY
(a) Clean and shape the contact surface of the vehicle body.
Text in Illustration
*a
Adhesive
*b
Vehicle Body
(1) Using a ...
Connecting Bluetooth®
The following can be performed using Bluetooth® wireless communication: ■
A portable audio player can be operated and listened to via multimedia system
■ Hands-free phone calls can be made via a cellular phone
In order to use wireless communication, register and connect a Bluetooth ...
Problem Symptoms Table
PROBLEM SYMPTOMS TABLE
HINT:
Use the table below to help determine the cause of problem symptoms.
If multiple suspected areas are listed, the potential causes of the symptom
are listed in order of probability in the "Suspected Area" column of the
table. Check each sym ...