Toyota Tacoma (2015-2018) Service Manual: System Diagram

Toyota Tacoma (2015-2018) Service Manual / 2gr-fks Starting / Smart Key System(for Start Function) / System Diagram

SYSTEM DIAGRAM

Component	Outline
Engine switch Transponder key amplifier	Turns on the power and starts the engine. Contains a built-in transponder key amplifier to start the engine when the key does not operate properly due to a depleted battery or wave interference.
Certification ECU (smart key ECU assembly)	Changes the power source mode by operating the ACC and IG relays. Controls starting by operating the starter relay. Performs key verification. Controls the electrical key antenna (outside), electrical key antenna (indoor) and door lock/unlock sensor. Outputs entry door lock/unlock commands. Outputs steering lock ECU (steering lock actuator or upr bracket assembly) lock/unlock command signals. Outputs immobiliser set/unset commands. Forms the entry function detection area. Records codes for smart verification.
ECM	Outputs a signal indicating that the engine has started to the certification ECU (smart key ECU assembly) when starting the engine.
Steering lock ECU (steering lock actuator or UPR bracket assembly)	Receives command signals from the certification ECU (smart key ECU assembly) and activates the steering lock ECU (steering lock actuator or UPR bracket assembly). Records codes for smart verification.
Combination meter assembly	Operates various warnings (messages on the multi-information display, sounding of the buzzer in the combination meter, blinking or illumination of the smart warning light) according to the command signals from the certification ECU (smart key ECU assembly). Displays information or operates LED when the smart key system has a malfunction. Outputs a vehicle speed signal to the main body ECU (multiplex network body ECU).
IG, ACC relay	Turns on/off according to the certification ECU (smart key ECU) and provides power to each system.
Stop light switch assembly	Detects that the brake pedal has been depressed (switch is on) and outputs a signal to the certification ECU (smart key ECU assembly).
No. 1 indoor electrical key antenna assembly (front floor) No. 2 indoor electrical key antenna assembly (rear floor)	Sends the request code from the certification ECU (smart key ECU assembly) and forms the vehicle interior detection area.
Electrical key and TPMS receiver assembly	Receives the smart key system code/wireless code sent from the key and sends it to the certification ECU (smart key ECU assembly).
Electrical key transmitter sub-assembly	Sends the ID code upon receiving a request signal.

Parts Location

PARTS LOCATION ILLUSTRATION ILLUSTRATION ILLUSTRATION ILLUSTRATION ...

How To Proceed With Troubleshooting

CAUTION / NOTICE / HINT HINT: Use these procedures to troubleshoot the smart key system (for Start Function). *: Use the Techstream. PROCEDURE 1. VEHIC ...

Other materials:

Terminals Of Ecu
TERMINALS OF ECU 1. BLIND SPOT MONITOR SENSOR LH (MASTER) Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition B12-3 (BIND) - B12-10 (BLGD) Y - W-B Blind spot monitor ...

Disassembly
DISASSEMBLY PROCEDURE 1. INSPECT COUNTERSHAFT REVERSE GEAR THRUST CLEARANCE (a) Using a dial indicator, measure the countershaft reverse gear thrust clearance. Standard clearance: 0.150 to 0.300 mm (0.0060 to 0.0118 in.) If the clearance is outside the specification, repl ...

Glass Position Initialization Incomplete (B2313)
DESCRIPTION The power window regulator motor assembly is operated by the power window regulator master switch assembly or power window regulator switch assembly. The power window regulator motor assembly has motor, regulator and ECU functions. When the ECU determines that the power window regu ...