SYSTEM DIAGRAM
Communication Table
Sender |
Receiver |
Signal |
Line |
---|---|---|---|
Main Body ECU (Multiplex Network Body ECU) |
Clearance Warning ECU Assembly |
Destination information signal |
CAN Communication Line |
ECM |
Clearance Warning ECU Assembly |
Shift position signal |
CAN Communication Line |
Combination Meter Assembly |
Clearance Warning ECU Assembly |
Vehicle speed signal |
CAN Communication Line |
Air Conditioning Amplifier Assembly |
Clearance Warning ECU Assembly |
Ambient temperature display signal |
CAN Communication Line |
Clearance Warning ECU Assembly |
Combination Meter Assembly |
|
CAN Communication Line |
Identification Information
Vehicle Identification And Serial Numbers
VEHICLE IDENTIFICATION AND SERIAL NUMBERS
1. VEHICLE IDENTIFICATION NUMBER
(a) The vehicle identification number is stamped on the vehicle body and on the
certification label, as shown in the illustration.
A:
Vehicle Identification Number
B:
C ...
Power Source Mode does not Change to ON (IG and ACC)
DESCRIPTION
If any of the following operations are performed, the certification ECU (smart
key ECU assembly) receives a signal, and changes the power source mode.
With the electrical key transmitter sub-assembly in the cabin, the engine
switch is pressed.
When the battery of the e ...
Check Mode Procedure
CHECK MODE PROCEDURE
1. DESCRIPTION
(a) Check mode has a higher sensitivity to malfunctions and can detect malfunctions
that normal mode cannot detect. Check mode can also detect all the malfunctions
that normal mode can detect. In check mode, DTCs are detected with 1 trip detection
logic.
...