Toyota Tacoma manuals

Toyota Tacoma (2015-2018) Service Manual: System Description

SYSTEM DESCRIPTION

1. FRONT SEAT HEATER

(a) By operating the seat heater switch on the air conditioning control assembly, the temperature can be controlled within the range of 36 to 42.2°C (96 to 108°F).

(b) The on/off status and heater level of each seat heater are indicated by the respective indicators provided in the air conditioning control assembly.

(c) The seat heaters of both seats are controlled by the seat heater control sub-assemblies.

Operation Check
OPERATION CHECK 1. CHECK SEAT HEATER (a) Turn the ignition switch to ON. (b) Check that the indicator illuminates and the surface of the front seat warms up, when the seat heater switch on the ai ...

Dtc Check / Clear
DTC CHECK / CLEAR 1. CHECK DTC (a) Connect the Techstream to the DLC3. (b) Turn the ignition switch to ON. (c) Turn the Techstream on. (d) Enter the following menus: Body Electrical / Air Conditi ...

Other materials:

Brake Booster Pump Motor on Time Abnormally Long (C1252)
DESCRIPTION The motor relay (semiconductor relay) is built into the master cylinder solenoid and drives the pump motor based on a signal from the skid control ECU (master cylinder solenoid). DTC No. DTC Detecting Condition Trouble Areas C1252 ...

Installation
INSTALLATION CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH and LH sides. The procedure listed below is for the LH side. PROCEDURE 1. INSTALL FRONT NO. 1 SPEAKER ASSEMBLY (a) Install the front No. 1 speaker assembly with the 4 screws. NOTICE: Do not touch t ...

If your vehicle has to be stopped in an emergency
Only in an emergency, such as if it becomes impossible to stop the vehicle in the normal way, stop the vehicle using the following procedure: Steadily step on the brake pedal with both feet and firmly depress it. Do not pump the brake pedal repeatedly as this will increase the effort required ...

© 2011-2024 Copyright www.ttguide.net