SYSTEM DESCRIPTION
1. WIRELESS CHARGER FUNCTION OUTLINE
(a) The wireless charging system enables Qi-compliant* rechargeable devices, such as a cellular phone, to be recharged by merely placing it on the charging area of the mobile wireless charger cradle assembly on the console panel.
HINT:
*: Qi (pronounced chee) is a wireless technology which allows devices to recharge without using any wires.
(b) The indicators shown in each condition are as follows:
Text in Illustration
*a |
Indicator Light (Green) |
*b |
Indicator Light (Amber) |
*c |
Charging Area |
Indicator Light |
Operation Condition |
|
---|---|---|
Green |
Amber |
|
Off |
Off |
No rechargeable device is on the charging area. |
Off |
On |
A rechargeable device is placed on the charging area or while recharging. |
On |
On |
Recharging is complete.*1 |
Blinks |
Blinks |
The indicators blink in the following situations:
|
Blinking Pattern |
Error Types |
---|---|
Green - Green - Amber |
High charging area temperature*2 |
Green - Amber - Green |
Wire harness disconnection between certification ECU (smart key ECU assembly) and mobile wireless charger cradle assembly |
Amber - Green - Amber |
Charging error |
HINT:
*1: Some phones, cases or cover type wireless chargers may not cause the green indicator to illuminate even though it is fully charged. Check the mobile device to confirm charge status. Please refer to precaution for the details (See page ).
*2: If foreign matter is present between the mobile wireless charger cradle assembly and a compatible rechargeable device, such as a cellular phone, charging efficiency is lowered and the foreign matter may heat up. If the mobile wireless charger cradle assembly detects heat from the foreign matter, the indicator lights will blink.
(c) When charging of the wireless charger stops temporarily
(1) If any of the following operations are performed with the electrical key transmitter sub-assembly present, charging may stop temporarily:
(2) If the mobile wireless charger cradle assembly surface becomes too hot during charging operation, the indicator lights (green and amber) on the mobile wireless charger cradle assembly will blink and charging will be canceled. If the surface cools down, the indicator light (green) will be illuminated and charging will be resumed.
Freeze Frame Data
FREEZE FRAME DATA
DESCRIPTION
(a) Whenever a forward recognition camera system DTC is stored, the forward recognition
camera stores the current vehicle state (ECU and sensor information) as Freeze Frame
Data.
CHECK FREEZE FRAME DATA
(a) Connect the Techstream to the DLC3.
(b) Turn the ignit ...
Disposal
DISPOSAL
CAUTION / NOTICE / HINT
CAUTION:
Before performing pre-disposal deployment of any SRS part, review and closely
follow all applicable environmental and hazardous material regulations. Pre-disposal
deployment may be considered hazardous material treatment.
PROCEDURE
1. PRECAUTION
...
Disassembly
DISASSEMBLY
PROCEDURE
1. REMOVE TELEPHONE MICROPHONE ASSEMBLY
Click here
2. REMOVE MICROPHONE CASE
HINT:
Use the same procedure for Double Cab.
Click here
3. REMOVE NO. 1 ROOF WIRE (w/ Vanity Light)
(a) w/ EC Mirror:
(1) Remove the No. 1 roof wire.
...