Toyota Tacoma (2015-2018) Service Manual: System Description

Toyota Tacoma (2015-2018) Service Manual / Engine Immobiliser / Engine Immobiliser System(w/o Smart Key System) / System Description

SYSTEM DESCRIPTION

1. ENGINE IMMOBILISER SYSTEM DESCRIPTION

The engine immobiliser system is designed to prevent the vehicle from being stolen. This system uses the transponder key ECU assembly that stores the key ID codes of authorized ignition keys. If an attempt is made to start the engine using an unauthorized key, the transponder key ECU assembly sends a signal to the ECM to prohibit fuel delivery and ignition, effectively disabling the engine.

2. FUNCTION OF MAIN COMPONENTS

Component	Outline
Transponder key ECU assembly	When a key is inserted into the ignition key cylinder, the transponder key ECU assembly checks if the key ID code received from the transponder key coil and registered key ID code match. When the engine is started, the transponder key ECU assembly checks if the engine ID codes stored in the ECM and transponder key ECU assembly match.
Transponder key coil	When a key is inserted into the ignition key cylinder, the transponder key amplifier receives the key ID code from the transponder chip in the key grip and outputs it to the transponder key ECU assembly.
ECM	The ECM receives key ID code verification results from the transponder key ECU assembly. The ECM also verifies the ECUs. Then judgment of whether to immobilise the engine is made.
Unlock warning switch assembly	The unlock warning switch assembly detects if the key is in the ignition key cylinder and outputs the result to the transponder key ECU assembly.
Security indicator light (air conditioning control assembly)	Depending on the operation of the transponder key ECU assembly, the security indicator light comes on or starts blinking.

3. SYSTEM FUNCTION

(a) When the transponder key ECU assembly detects that the unlock warning switch assembly is on, the transponder key ECU assembly applies current to the transponder key coil and produces a magnetic field around the antenna coil. A transponder chip in the key grip outputs a key ID code signal using electromotive force generated by the magnetic field. The transponder key coil receives the signal and sends it to the transponder key ECU assembly. The transponder key ECU assembly checks if the key ID code received from the transponder key coil matches the registered key ID code.

When the engine is started, the ECM communicates with the transponder key ECU assembly and checks the key verification result. In addition, the ECM checks if the engine ID codes stored in the transponder key ECU assembly and ECM match. If they do not match, the ECM prohibits engine start.

(b) The security indicator light blinking pattern is as shown below (when changing from the immobiliser set status to the unset status):

Precaution

PRECAUTION 1. PRECAUTIONS WHEN USING TECHSTREAM (a) When using the Techstream to troubleshoot the engine immobiliser system: Connect the Techstream to the DLC3 while the ignition switch is off, and ...

System Diagram

SYSTEM DIAGRAM ...

Other materials:

AUTO LSD Indicator Light does not Come ON
DESCRIPTION The AUTO LSD does not operate even if the VSC OFF switch is pressed under the following conditions: The brake system is faulty. The temperature inside the hydraulic brake booster increases and the AUTO LSD operation is suspended. WIRING DIAGRAM CAUTION / NOTI ...

Pressure Control Solenoid "A" Actuator Stuck Off (P07457F)
SYSTEM DESCRIPTION The ECM uses the vehicle speed signal and signals from the transmission revolution sensors (NT, SP2) to detect the actual gear (1st, 2nd, 3rd, 4th, 5th or 6th gear). The ECM compares the actual gear with the shift schedule in the ECM memory to detect mechanical problems of t ...

Precaution
PRECAUTION 1. IGNITION SWITCH EXPRESSIONS (a) The type of ignition switch used on this model differs according to the specifications of the vehicle. The expressions listed in the table below are used in this section. Expression Ignition Switch (Position) Engine ...