SYSTEM DESCRIPTION
1. LIN COMMUNICATION SYSTEM DESCRIPTION
The LIN communication system is used for communication between the components in the tables below. If communication cannot be performed through LIN communication because of an open in the communication lines or other reasons, the master control ECU of the relevant system will store a DTC. Refer to the table below about the communication bus lines and connected components.
HINT:
Component |
Master Control |
LIN Communication DTC Output Function |
---|---|---|
Main Body ECU (Multiplex Network Body ECU) |
â—‹ |
â—‹ |
Front Power Window Regulator Motor Assembly LH*1 |
- |
- |
Front Power Window Regulator Motor Assembly RH*1 |
- |
- |
Power Window Regulator Master Switch Assembly*1 |
- |
- |
Sliding Roof ECU (Sliding Roof Drive Gear Sub-assembly)*2 |
- |
- |
Component |
Master Control |
LIN Communication DTC Output Function |
---|---|---|
Certification ECU (Smart Key ECU Assembly) |
â—‹ |
â—‹ |
Steering Lock ECU (Steering Lock Actuator or Upper Bracket Assembly) |
- |
- |
Removal
REMOVAL
PROCEDURE
1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transmission)
(a) Using a molding remover A, disengage the 2 claws to separate the
shifting hole cover sub-assembly.
(b) Rotate the shift lever knob sub-as ...
Rear Seat Inner Belt Assembly(for Double Cab)
Installation
INSTALLATION
PROCEDURE
1. INSTALL REAR SEAT INNER BELT ASSEMBLY
(a) for LH Side:
(1) Install the rear seat inner belt assembly with the bolt.
Text in Illustration
*a
Protruding Part
*b
...
Diagnosis System
DIAGNOSIS SYSTEM
1. DESCRIPTION
(a) Blind spot monitor data and Diagnostic Trouble Codes (DTCs) can be read from
the Data Link Connector 3 (DLC3) of the vehicle. When the system seems to be malfunctioning,
use the Techstream to check for malfunctions and to repair it.
2. CHECK DLC3
(a) Check ...