DESCRIPTION
The forward recognition camera receives steering angle information from the spiral cable with sensor sub-assembly. If the forward recognition camera detects a spiral cable with sensor sub-assembly malfunction, DTC C1A47 is stored.
DTC No. |
Detection Item |
DTC Detection Condition |
Trouble Area |
---|---|---|---|
C1A47 |
Steering Angle Sensor |
3 seconds after the ignition switch is turned to ON, a signal from the spiral cable with sensor sub-assembly indicating that there is a spiral cable with sensor sub-assembly malfunction is detected by the forward recognition camera for 5 seconds or more. |
|
CAUTION / NOTICE / HINT
NOTICE:
Click here
Click here
PROCEDURE
1. |
CHECK FOR DTCs (VEHICLE STABILITY CONTROL SYSTEM) |
HINT:
Forward recognition camera system DTC C1A47 may be stored due to a malfunction in the vehicle stability control system. Therefore it is necessary to check for and troubleshoot vehicle stability control system DTCs first.
(a) Check for DTCs.
Click here
Click here
Result |
Proceed to |
---|---|
Vehicle stability control system DTCs are not output |
A |
Vehicle stability control system DTCs are output (for Vacuum Brake Booster) |
B |
Vehicle stability control system DTCs are output (for Hydraulic Brake Booster) |
C |
B |
GO TO VEHICLE STABILITY CONTROL SYSTEM |
C |
GO TO VEHICLE STABILITY CONTROL SYSTEM |
|
2. |
CHECK FOR DTCs (FORWARD RECOGNITION CAMERA SYSTEM) |
(a) Clear the DTCs.
Click here
(b) Make sure that the DTC detection conditions are met.
HINT:
If the conditions are not met, the system cannot detect the malfunction.
(c) Check for DTCs.
Click here
Result |
Proceed to |
---|---|
DTC C1A47 is not output |
A |
DTC C1A47 is output |
B |
A |
USE SIMULATION METHOD TO CHECK |
|
3. |
REPLACE FORWARD RECOGNITION CAMERA |
(a) Replace the forward recognition camera.
Click here
(b) Perform forward recognition camera axis adjustment.
Click here
|
4. |
CHECK FOR DTCs (FORWARD RECOGNITION CAMERA SYSTEM) |
(a) Clear the DTCs.
Click here
(b) Make sure that the DTC detection conditions are met.
HINT:
If the conditions are not met, the system cannot detect the malfunction.
(c) Check for DTCs.
Click here
Result |
Proceed to |
---|---|
DTC C1A47 is not output |
A |
DTC C1A47 is output |
B |
A |
END (FORWARD RECOGNITION CAMERA WAS DEFECTIVE) |
B |
REPLACE SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY |
Problem Symptoms Table
PROBLEM SYMPTOMS TABLE
HINT:
Proceed to the troubleshooting for each circuit in the table below.
Symptom
Suspected Area
See page
Passenger seat occupant conditions and displayed passenger airbag ON/OFF
indicator do not correspond
Tr ...
Operation Check
OPERATION CHECK
1. MALFUNCTION DISPLAY (MULTI-INFORMATION DISPLAY)
(a) Open circuit indication
(1) If there is an open circuit between a No. 1 ultrasonic sensor and the clearance
warning ECU assembly or a sensor is malfunctioning, the malfunction is displayed
as shown in the illustration.
...
Overhead console (Access Cab and Double Cab models)
The overhead console is useful for temporarily storing sunglasses and similar
small items.
Pull the lid down while pushing the knob.
CAUTION
■Caution while driving
Keep the overhead console closed.
Injuries may result in the event of an accident or sudden braking.
■Items unsuit ...