Toyota Tacoma manuals

Toyota Tacoma (2015-2018) Service Manual: Removal

REMOVAL

CAUTION / NOTICE / HINT

NOTICE:

  • Before starting the work, make sure that the ignition switch is off and depress the brake pedal more than 20 times.
  • As high pressure is applied to the No. 1 brake actuator tube, never deform it.
  • Do not turn the ignition switch to ON until the work is completed.

HINT:

When pressure in the accumulator is released, reaction force becomes lighter and stroke becomes longer.

PROCEDURE

1. DRAIN BRAKE FLUID

NOTICE:

Immediately wash off any brake fluid off immediately that comes into contact with a painted surface.

2. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

(See page 3. SEPARATE DRIVER SIDE JUNCTION BLOCK 3. SEPARATE DRIVER SIDE JUNCTION BLOCK )

3. SEPARATE DRIVER SIDE JUNCTION BLOCK

4. SEPARATE MASTER CYLINDER PUSH ROD CLEVIS

5. REMOVE HYDRAULIC BRAKE BOOSTER 5. REMOVE HYDRAULIC BRAKE BOOSTER

5. REMOVE HYDRAULIC BRAKE BOOSTER

(a) Disconnect the 3 connectors from the hydraulic brake booster.

(a) Disconnect the 3 connectors from the hydraulic brake booster.

(b) Using a union nut wrench, disconnect the 4 brake lines from the hydraulic brake booster.

(c) Use tags or labels to identify the place to reconnect each line.

Text in Illustration

*a

to Right Rear Wheel

*b

to Right Fear Wheel

*c

to Left Front Wheel

*d

to Left Rear Wheel

(d) Remove the 4 nuts and pull out the hydraulic brake booster.

(e) Remove the brake booster gasket.

Disassembly
DISASSEMBLY PROCEDURE 1. REMOVE BRAKE ACTUATOR BRACKET NO. 1 (a) Using a hexagon wrench (5 mm), remove the screw and brake actuator bracket No. 1. (b) Using a screwdriver, remove th ...

Inspection
INSPECTION PROCEDURE 1. INSPECT BRAKE BOOSTER PUMP ASSEMBLY (a) Connect the positive (+) lead from the battery to the red cable of the pump, and the negative (-) lead to the black cable. (b) C ...

Other materials:

Air Mix Damper Control Servo Motor Circuit (Passenger Side) (B1441/41)
DESCRIPTION This No. 2 air conditioning radiator damper servo sub-assembly (for front passenger side air mix) is controlled by the air conditioning amplifier assembly and moves the air mix damper (for front passenger side) to the desired position. DTC No. DTC Detection Co ...

Automatic Transmission Unit(for 2tr-fe)
Components COMPONENTS ILLUSTRATION ILLUSTRATION ILLUSTRATION ILLUSTRATION ILLUSTRATION ILLUSTRATION ILLUSTRATION ILLUSTRATION ILLUSTRATION ...

Data List / Active Test
DATA LIST / ACTIVE TEST 1. DATA LIST HINT: Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals ...

В© 2011-2024 Copyright www.ttguide.net