REMOVAL
PROCEDURE
1. REMOVE REAR BUMPER ASSEMBLY (w/ Towing Package)
(See page )
2. REMOVE REAR BUMPER ASSEMBLY (w/o Towing Package)
(See page )
3. REMOVE CONNECTOR COVER (w/ Towing Package)
(See page )
4. REMOVE REAR BUMPER HOLE COVER (w/o Towing Package)
(See page )
5. REMOVE REAR BUMPER PAD SUB-ASSEMBLY (w/ Towing Package)
(See page )
6. REMOVE REAR BUMPER PAD SUB-ASSEMBLY (w/o Towing Package)
(See page )
7. REMOVE REAR BUMPER EXTENSION LH (w/ Towing Package)
(See page )
8. REMOVE REAR BUMPER EXTENSION LH (w/o Towing Package)
(See page )
9. REMOVE REAR BUMPER EXTENSION RH (w/ Towing Package)
HINT:
Use the same procedure as for the LH side.
10. REMOVE REAR BUMPER EXTENSION RH (w/o Towing Package)
HINT:
Use the same procedure as for the LH side.
11. REMOVE NO. 1 ULTRASONIC SENSOR
HINT:
Use the same procedure for both sides.
(a) Disengage the 4 claws to remove the 4 No. 1 ultrasonic sensors as shown in the illustration.
Rear Combination Light Assembly
Components
COMPONENTS
ILLUSTRATION
Disassembly
DISASSEMBLY
CAUTION / NOTICE / HINT
HINT:
Use the same procedure for both the LH and RH sides.
The procedure described below is for the LH side.
PROCEDURE
1. REMOVE TAIL AND TURN SIGNAL LIGHT BULB
(a) Turn th ...
Taillight Relay Circuit
DESCRIPTION
The main body ECU (multiplex network body ECU) controls the operation of the
TAIL relay.
WIRING DIAGRAM
CAUTION / NOTICE / HINT
NOTICE:
Inspect the fuses for circuits related to this system before performing
the following inspection procedure.
If the main body EC ...
How To Proceed With Troubleshooting
CAUTION / NOTICE / HINT
HINT:
The wireless door lock control system troubleshooting procedures are
based on the premise that the power door lock control system is operating
normally. Check the power door lock control system first before troubleshooting
the wireless door lock co ...