Toyota Tacoma (2015-2018) Service Manual: Reassembly
REASSEMBLY
PROCEDURE
1. TEMPORARILY TIGHTEN FRONT DISC BRAKE BLEEDER PLUG
(a) Provisionally tighten the bleeder plug to the disc brake cylinder.
(b) Install the bleeder plug cap onto the bleeder plug.
2. INSTALL PISTON SEAL
|
(a) Apply lithium soap base glycol grease to 4 new piston seals. |
|
(b) Install the 4 piston seals onto the disc brake cylinder.
3. INSTALL FRONT DISC BRAKE PISTON
|
(a) Apply lithium soap base glycol grease to the 4 disc brake pistons and a new 4 cylinder boots. |
|
(b) Install the 4 disc brake pistons onto the disc brake cylinder.
NOTICE:
Do not install the disc brake piston into the disc brake cylinder forcibly.
4. INSTALL CYLINDER BOOT
|
(a) Install the 4 cylinder boots onto the disc brake cylinder. HINT: Install the cylinder boot securely onto the grooves of the disc brake cylinder and piston. |
|
(b) Install the 4 cylinder boot set rings.
Installation
INSTALLATION
PROCEDURE
1. INSTALL FRONT DISC
(a) Align the matchmarks of the front disc and the front axle hub and
install the front disc.
Text in Illustration
...
Other materials:
Intake Air Control Valve Actuator(for Acis)
Components
COMPONENTS
ILLUSTRATION
Inspection
INSPECTION
PROCEDURE
1. INSPECT INTAKE AIR CONTROL VALVE ACTUATOR
(a) Check the operate.
(1) Apply battery voltage to the connector, and check the operation of
the intake air control valve actuator gear.
Text in Illustrati ...
Trailer towing
Your vehicle is designed primarily as a passenger-and-load-carrying vehicle.
Towing a trailer can have an adverse impact on handling, performance, braking, durability,
and fuel consumption. For your safety and the safety of others, you must not overload
your vehicle or trailer. You must also e ...
Disassembly
DISASSEMBLY
CAUTION / NOTICE / HINT
CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
PROCEDURE
1. REMOVE REAR SEAT CUSHION BAND
(a) Remove the screw and rear seat cushion band.
2. REMOVE REAR SEAT HEADREST HO ...
