REASSEMBLY
CAUTION / NOTICE / HINT
CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
PROCEDURE
1. INSTALL SEPARATE TYPE REAR SEATBACK COVER
(a) Using hog ring pliers, install the separate type rear seatback cover with 2 new hog rings. Text in Illustration
NOTICE:
|
|
(b) Engage the 2 hook-and-loop fasteners.
2. INSTALL REAR SEAT LOCK HANDLE
(a) Install the rear seat lock handle with the screw. |
|
3. INSTALL REAR SEATBACK LOCK ASSEMBLY
(a) Install the rear seatback lock assembly with the 2 bolts. Torque: 30 N·m {306 kgf·cm, 22 ft·lbf} |
|
4. INSTALL REAR CENTER SEAT OUTER BELT ASSEMBLY
5. INSTALL CENTER SEATBACK PAD
6. INSTALL REAR SEATBACK FRAME SUB-ASSEMBLY
(a) Engage the 2 hooks to install the rear seatback frame sub-assembly. |
|
(b) Engage the 2 hooks. |
|
7. INSTALL REAR SEAT SHOULDER BELT COVER
(a) Engage the 4 claws to install the rear seat shoulder belt cover. |
|
8. INSTALL SEAT BELT ANCHOR COVER CAP
(a) Engage the 2 claws to install the seat belt anchor cover cap. |
|
9. INSTALL REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY
(a) Engage the protrusion of the rear No. 1 seat headrest support assemblies with the groove in the installation portion of the rear seatback frame sub-assembly. Text in Illustration
|
|
(b) Engage the 4 claws to install the 2 rear No. 1 seat headrest support assemblies.
10. INSTALL REAR SEAT HEADREST SUPPORT
(a) Engage the 4 claws to install the 2 rear seat headrest supports. |
|
(b) Engage the hook. |
|
(c) Connect the rear seatback cover strap. |
|
(d) Connect the 2 rear seatback cover straps. |
|
11. INSTALL REAR SEATBACK BOARD SUB-ASSEMBLY
(a) Engage the 5 claws and install the rear seatback board sub-assembly. |
|
(b) Install the 3 screws.
12. INSTALL REAR SEAT HEADREST ASSEMBLY
(a) Disengage the 2 lock buttons of the 2 rear seat headrest supports to install the rear seat headrest assembly.
13. INSTALL REAR CENTER SEAT HEADREST ASSEMBLY
(a) Disengage the lock button of the rear No. 1 seat headrest support assembly to install the rear center seat headrest assembly.
14. INSTALL SEPARATE TYPE REAR SEAT CUSHION COVER
(a) Using hog ring pliers, install the separate type rear seat cushion cover with 6 new hog rings. Text in Illustration
NOTICE:
|
|
15. INSTALL REAR SEAT CUSHION FRAME SUB-ASSEMBLY
(a) Engage the hook and install the rear seat cushion frame sub-assembly. |
|
16. INSTALL REAR SEAT CUSHION HINGE SUB-ASSEMBLY
(a) Install the 2 rear seat cushion hinge sub-assemblies with the 2 bolts. Torque: 21 N·m {214 kgf·cm, 15 ft·lbf} |
|
17. INSTALL REAR SEAT HEADREST HOLDER
(a) Engage the 8 claws to install the 4 rear seat headrest holders. |
|
18. INSTALL REAR SEAT CUSHION BAND
(a) Install the rear seat cushion band with the screw. |
|
Theft Deterrent System Unexpectedly Sets Itself
DESCRIPTION
A situation in which the theft deterrent system unexpectedly sets itself can
be caused when the main body ECU (multiplex network body ECU) cannot detect whether
a door is open or closed.
If the theft deterrent system unexpectedly sets itself, there may be a malfunction
in a court ...
Tire inflation pressure
■ Tire inflation pressure
The recommended cold tire inflation pressure and tire size is displayed on the
tire and loading information label.
Regular Cab and Double Cab models
Access Cab models
■ Inspection and adjustment procedure
1. Tire valve
2. Tire pressure gauge
Re ...
Pattern Select Switch Power Mode Circuit
DESCRIPTION
The ECM memory contains the programs for the normal and PWR shift patterns.
By following the programs corresponding to the signals from the pattern select
switch assembly, park/neutral position switch and other various sensors, the ECM
switches the shift solenoid valves on and off, ...