REASSEMBLY
CAUTION / NOTICE / HINT
CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
PROCEDURE
1. INSTALL SEPARATE TYPE REAR SEATBACK COVER
(a) Using hog ring pliers, install the separate type rear seatback cover with 2 new hog rings. Text in Illustration
NOTICE:
|
|
(b) Engage the 2 hook-and-loop fasteners.
2. INSTALL REAR SEAT LOCK HANDLE
(a) Install the rear seat lock handle into the rear seatback lock. |
|
3. INSTALL REAR SEATBACK LOCK ASSEMBLY
(a) Install the rear seatback lock assembly with the 2 bolts. Torque: 30 N·m {306 kgf·cm, 22 ft·lbf} |
|
4. INSTALL REAR SEATBACK FRAME SUB-ASSEMBLY
(a) Engage the 2 hooks to install the rear seatback frame sub-assembly. |
|
(b) Engage the 2 hooks. |
|
(c) Connect the 2 rear seatback cover straps. |
|
5. INSTALL REAR SEAT HEADREST SUPPORT
(a) Engage the 4 claws and install the 2 rear seat headrest supports.
6. INSTALL REAR SEATBACK BOARD SUB-ASSEMBLY
(a) Engage the 4 claws to install the rear seatback board sub-assembly. |
|
(b) Install the 2 screws.
7. INSTALL REAR SEAT HEADREST ASSEMBLY
(a) Disengage the 2 lock buttons of the 2 rear seat headrest supports to install the rear seat headrest assembly.
8. INSTALL SEPARATE TYPE REAR SEAT CUSHION COVER
(a) Using hog ring pliers, install the separate type rear seat cushion cover with 6 new hog rings. Text in Illustration
NOTICE:
|
|
9. INSTALL REAR SEAT CUSHION FRAME SUB-ASSEMBLY
(a) Engage the hook to install the rear seat cushion frame sub-assembly. |
|
10. INSTALL REAR SEAT CUSHION HINGE SUB-ASSEMBLY
(a) Install the 2 rear seat cushion hinge sub-assemblies with the 2 bolts. Torque: 21 N·m {214 kgf·cm, 15 ft·lbf} |
|
11. INSTALL REAR SEAT HEADREST HOLDER
(a) Engage the 4 claws to install the 2 rear seat headrest holders. |
|
12. INSTALL REAR SEAT CUSHION BAND
(a) Install the rear seat cushion band with the screw. |
|
Replacement
REPLACEMENT
PROCEDURE
1. REPLACE AUTOMATIC TRANSMISSION FLUID
(a) Lift the vehicle. [*1]
NOTICE:
Set the vehicle on a lift so that the vehicle is kept level when it is lifted
up (make sure that the tilt angle from the front to rear of the vehicle is within
+/-1°).
(b) Remove th ...
Bottle holders
Front
Front console box (Separated type
front seat)
Rear (Double Cab models)
■Bottle holders
Depending on their size or shape, some bottles may not fit in the holders.
NOTICE
■Items that should not be stowed in the bottle holders
Put the cap on before stowing a bottle. Do ...
Noise Occurs from V-ribbed Belt or Generator Assembly
PROCEDURE
1.
CONFIRM PROBLEM SYMPTOM
(a) Confirm the problem symptom.
Result
Result
Proceed to
Noise occurs from fan and generator V belt
A
Noise occurs from generator assembly
B
...