REASSEMBLY
CAUTION / NOTICE / HINT
HINT:
The procedure described below is for the LH side. Use the same procedure for both the LH and RH sides, unless otherwise specified.
PROCEDURE
1. INSTALL REAR SEAT CUSHION FRAME SUB-ASSEMBLY
(a) Install the rear seat cushion frame sub-assembly to the rear seat cushion pad. |
|
2. INSTALL SEPARATE TYPE REAR SEAT CUSHION COVER
(a) Install the separate type rear seat cushion cover. |
|
(b) Engage the hook.
3. INSTALL REAR SEAT LOCK ASSEMBLY
(a) Temporarily install the rear seat lock assembly with the bolt. |
|
4. INSTALL REAR SEAT CUSHION SUPPORT BRACKET SUB-ASSEMBLY
(a) Temporarily install the rear seat cushion support bracket sub-assembly with the 2 bolts. |
|
(b) Using T30 "TORX" socket wrench, tighten bolt A.
Torque:
13 N·m {133 kgf·cm, 10 ft·lbf}
(c) Tighten bolt B.
Torque:
18 N·m {184 kgf·cm, 13 ft·lbf}
(d) Tighten bolt C.
Torque:
7.0 N·m {71 kgf·cm, 62 in·lbf}
5. INSTALL REAR SEAT LOCK HANDLE
(a) Engage the claw and install the rear seat lock handle. |
|
6. INSTALL REAR SEAT HINGE SUB-ASSEMBLY
(a) Install the rear seat hinge sub-assembly with the bolt. Torque: 18 N·m {184 kgf·cm, 13 ft·lbf} |
|
7. INSTALL REAR SEAT CUSHION COVER
(a) Install the rear seat cushion cover with the screw. |
|
8. INSTALL REAR SEAT CUSHION UNDER COVER
(a) Install the rear seat cushion under cover with the screw. |
|
9. INSTALL REAR SEATBACK LOCK COVER
(a) Install the rear seatback lock cover with the 2 screws. |
|
10. INSTALL REAR SEATBACK COVER
(a) Engage the 2 claws and install the rear seatback cover. |
|
(b) Install the 2 screws.
LIN Communication Bus Malfunction (B2325)
DESCRIPTION
The main body ECU (multiplex network body ECU) monitors communication between
all the ECUs connected to the door bus lines. When the main body ECU (multiplex
network body ECU) detects errors in communication with all the ECUs connected to
the door bus lines at 2.6-second intervals ...
Tonneau Cover Assembly
Removal
REMOVAL
PROCEDURE
1. REMOVE TOP COVER SUB-ASSEMBLY
(a) Open the cover.
(b) Remove the bolt and top cover sub-assembly.
2. REMOVE REAR BODY SIDE PANEL PROTECTOR
Click here
Installation
INSTALLATION
PROCEDURE
1. INSTALL REAR ...
Precaution
PRECAUTION
1. IGNITION SWITCH EXPRESSION
(a) The type of ignition switch used on this model differs depending on the specifications
of the vehicle.
The expressions listed in the table below are used in this section.
Expression
Ignition Switch (Position)
Engine ...