REASSEMBLY
PROCEDURE
1. INSTALL CONSOLE COMPARTMENT DOOR HINGE SUB-ASSEMBLY
(a) Engage the 2 guides to install the console compartment door hinge sub-assembly. |
|
(b) Install the 4 screws.
(c) Engage the 2 guides and 4 claws to install the console compartment door moulding cover. |
|
2. INSTALL CONSOLE COMPARTMENT OUTER DOOR
(a) Engage the 2 guides and 2 claws to install the console compartment outer door. |
|
(b) Install the 4 screws.
3. INSTALL CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY
(a) Engage the 2 guides and 4 claws to install the console compartment door sub-assembly. |
|
(b) Install the 6 screws.
(c) Engage the 2 guides to install the console compartment door lock lever. |
|
(d) Install the 2 screws.
4. INSTALL CONSOLE COMPARTMENT DOOR CUSHION
HINT:
Use the same procedure as for the opposite side.
(a) Engage the claw to install the console compartment door cushion. |
|
Vehicle data recordings
Your Toyota is equipped with several sophisticated computers that will record
certain data, such as: • Engine speed
• Accelerator status
• Brake status
• Vehicle speed
• Shift position (except manual transmission)
The recorded data varies according to the vehicle grade level and opt ...
Rear Speed Sensor RH Performance (C1411,C1412)
DESCRIPTION
Refer to DTCs C1401 and C1402 (See page ).
DTC Code
DTC Detection Condition
Trouble Area
C1411
C1412
One of the following conditions is met:
When the vehicle is driven in reverse at a speed of 3 km/h (2
...
Side Airbag Sensor RH Circuit Malfunction (B1620/21)
DESCRIPTION
The side airbag sensor assembly RH consists of parts such as the safing sensor,
the diagnostic circuit and the lateral deceleration sensor.
When the airbag sensor assembly receives signals from the lateral deceleration
sensor, it determines whether or not the SRS should be activate ...