Toyota Tacoma (2015-2018) Service Manual: Reassembly
REASSEMBLY
PROCEDURE
1. INSTALL SHIFT SOLENOID VALVE SLT
|
(a) Install the shift solenoid valve SLT and straight pin to the transmission valve body assembly. |
|
2. INSTALL SHIFT SOLENOID VALVE SL2
|
(a) Install the shift solenoid valve SL2 and straight pin to the transmission valve body assembly. |
|
3. INSTALL SHIFT SOLENOID VALVE SL1
|
(a) Install the shift solenoid valve SL1 and straight pin to the transmission valve body assembly. |
|
4. INSTALL SHIFT SOLENOID VALVE SL3
|
(a) Install the shift solenoid valve SL3 and straight pin to the transmission valve body assembly. |
|
5. INSTALL SHIFT SOLENOID VALVE SLU
|
(a) Install the shift solenoid valve SLU and straight pin to the transmission valve body assembly. |
|
6. INSTALL SHIFT SOLENOID VALVE SL4
|
(a) Install the shift solenoid valve SL4 and straight pin to the transmission valve body assembly. |
|
7. INSTALL SHIFT SOLENOID VALVE SL
|
(a) Install the shift solenoid valve SL and straight pin to the transmission valve body assembly. Torque: 6.4 N·m {65 kgf·cm, 57 in·lbf} |
|
8. INSTALL SOLENOID LOCK PLATE
|
(a) Install the solenoid lock plate to the transmission valve body assembly with the 3 bolts. Torque: 6.4 N·m {65 kgf·cm, 57 in·lbf} |
|
Inspection
INSPECTION
PROCEDURE
1. INSPECT SHIFT SOLENOID VALVE SL1
(a) Measure the resistance according to the value(s) in the table below.
Text in Illustration
*a
...
Installation
INSTALLATION
PROCEDURE
1. INSTALL TRANSMISSION CASE GASKET
(a) Install 2 new transmission case gaskets to the automatic transmission case
sub-assembly.
2. INSTALL MANUAL VALVE
(a) Coat the manu ...
Other materials:
Automatic Light Control Sensor
Components
COMPONENTS
ILLUSTRATION
Installation
INSTALLATION
PROCEDURE
1. INSTALL AUTOMATIC LIGHT CONTROL SENSOR
(a) Engage the 2 claws to install the automatic light control sensor.
2. INSTALL NO. 2 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY
(See page )
On-vehicle Inspection
ON ...
Operation Check
OPERATION CHECK
1. OPERATION DESCRIPTION
(a) Push-button start function:
(1) When the electrical key transmitter sub-assembly is in a detection area inside
the vehicle and the brake pedal is depressed, the engine is started by pressing
the engine switch.
(2) When the electrical key transmitt ...
License Plate Light Assembly
Components
COMPONENTS
ILLUSTRATION
Removal
REMOVAL
CAUTION / NOTICE / HINT
HINT:
Use the same procedure for both the LH and RH sides.
The procedure described below is for the LH side.
PROCEDURE
1. REMOVE LICENSE PLATE LIGHT ASSEMBLY
(a) Disconnect the con ...
