PROBLEM SYMPTOMS TABLE
HINT:
Symptom |
Suspected Area |
Link |
---|---|---|
"Pre-Collision System Unavailable" is displayed |
Perform millimeter wave radar sensor assembly adjustment*1 |
|
Millimeter wave radar sensor assembly |
|
|
Combination meter assembly |
|
|
"Pre-Collision System Unavailable Clean Sensor" is displayed |
Foreign matter attached to millimeter wave radar sensor assembly |
- |
Millimeter wave radar sensor assembly |
|
|
Combination meter assembly |
|
|
"Front Camera Unavailable" is displayed |
Check current condition of forward recognition camera based on related Data List items.
|
|
Forward recognition camera |
|
|
Combination meter assembly |
|
|
Millimeter wave radar sensor assembly |
|
|
"Front Camera Unavailable Remove Debris On Windshield" is displayed |
The forward recognition camera or windshield glass within the field of view of the forward recognition camera is dirty or fogged up |
- |
Forward recognition camera |
|
|
Combination meter assembly |
|
|
Millimeter wave radar sensor assembly |
|
|
Although there is possibility of collision, pre-collision controls (all controls) do not operate ("Pre-collision System Unavailable" is not displayed) |
Check if pre-collision system is canceled |
- |
Vehicle condition/environment does not match the pre-collision system operation conditions (Confirm control operation conditions) |
|
|
Check installation condition of millimeter wave radar sensor assembly |
|
|
Perform millimeter wave radar sensor assembly adjustment |
|
|
Millimeter wave radar sensor assembly |
|
|
Check installation condition of forward recognition camera |
|
|
Perform forward recognition camera adjustment |
|
|
Forward recognition camera |
|
|
Although there is no possibility of collision, pre-collision controls (all controls) operate |
Vehicle condition/environment does not match the pre-collision system operation conditions (Confirm control operation conditions) |
|
Check installation condition of millimeter wave radar sensor assembly |
|
|
Perform millimeter wave radar sensor assembly adjustment |
|
|
Millimeter wave radar sensor assembly |
|
|
Check installation condition of forward recognition camera |
|
|
Perform forward recognition camera adjustment |
|
|
Forward recognition camera |
|
|
Pre-collision system does not operate |
Check if pre-collision system is canceled |
- |
ECU power source circuit |
|
|
Millimeter wave radar sensor assembly |
|
|
Pre-collision system cannot be canceled (PCS warning light does not illuminate) |
Check steering pad switch assembly condition |
- |
Combination meter assembly (check if indicator illuminates using Active Test) |
|
|
Millimeter wave radar sensor assembly |
|
|
Combination meter assembly |
|
|
Pre-collision system warning timing cannot be changed (warning timing setting screen not displayed on multi-information display) |
Millimeter wave radar sensor assembly |
|
Combination meter assembly |
|
Transmission Range Sensor "A" Circuit Open (P070513,P070562)
DESCRIPTION
The park/neutral position switch detects the shift lever position and sends signals
to the ECM.
DTC No.
DTC Detection Condition
Trouble Area
SAE
P070513
All of the following signals are OFF simultaneously for 60 ...
P/W Master Switch Communication Stop (B1206)
DESCRIPTION
This DTC is stored when LIN communication between the power window regulator
master switch assembly and main body ECU (multiplex network body ECU) stops for
10 seconds or more.
DTC No.
DTC Detection Condition
Trouble Area
B1206
...
Initialization
INITIALIZATION
1. RESET MEMORY
NOTICE:
Perform Reset Memory (AT initialization) when replacing the automatic
transmission assembly, transmission valve body assembly or any of the shift
solenoid valves.
Reset Memory can be performed only with the Techstream.
HINT:
The E ...