PRECAUTION
1. The navigation system uses an SD card containing data such as map data.
Text in Illustration
*a |
SD Card |
2. Precaution for removing the SD card
NOTICE:
Without the SD card inserted, the navigation system will not operate normally. Therefore, remove the SD card only when necessary, such as when updating the map data.
(a) Before removing the SD card, make sure that the ignition switch is turned off.
3. Precaution for handling the SD card
NOTICE:
Disassembly
DISASSEMBLY
PROCEDURE
1. REMOVE INTAKE VALVE
(a) Using SST, compress the inner compression spring and remove the valve
spring retainer locks.
SST: 09202-70020
SST: 09202-00021
09202-01010
09202-01020
(b) Remove the valve s ...
AV Signal Stoppage (Low Battery Voltage) (B158F)
DESCRIPTION
This DTC is stored when a video or audio signal is interrupted due to battery
voltage input to the radio and display receiver assembly dropping temporarily.
DTC Code
DTC Detection Condition
Trouble Area
B158F
A video or aud ...
Lost Communication with HMI-LAN (B150A)
DESCRIPTION
The combination meter assembly receives a text data signal from the navigation
receiver assembly or radio and display receiver assembly via local bus communication.
Based on this signal, navigation system information is displayed on the multi-information
display.
This DTC is store ...