ON-VEHICLE INSPECTION
PROCEDURE
1. INSPECT FRONT WIPER MOTOR (for Driver Side)
Text in Illustration
*a |
Matchmark |
(a) Check the stop (park) position.
(b) Operate the windshield wiper motor assembly.
(c) Stop the windshield wiper motor assembly operation.
(d) Check the automatic stop (park) position.
HINT:
After the front wiper motor is stopped, check the automatic stop position after lifting the wiper blade 2 times.
OK:
The front wiper stops at the position shown in the illustration.
2. INSPECT FRONT WIPER MOTOR (for Front Passenger Side)
Text in Illustration
*a |
Matchmark |
(a) Check the stop (park) position.
(b) Operate the windshield wiper motor assembly.
(c) Stop the windshield wiper motor assembly operation.
(d) Check the automatic stop (park) position.
HINT:
After the front wiper motor is stopped, check the automatic stop position after lifting the wiper blade 2 times.
OK:
The front wiper stops at the position shown in the illustration.
Installation
INSTALLATION
PROCEDURE
1. INSTALL BRAKE PEDAL PAD
(a) Install the brake pedal pad onto the brake pedal.
2. INSTALL BRAKE PEDAL SUPPORT ASSEMBLY
(a) Install the brake pedal support assembly with 4 nuts.
Torque:
14 N·m {145 kgf·cm, 10 ft·lbf}
(b) Connect the stop light switch connector t ...
Removal
REMOVAL
PROCEDURE
1. REMOVE FRONT WHEEL
2. REMOVE REAR WHEEL
3. REMOVE TIRE PRESSURE WARNING VALVE AND TRANSMITTER
(a) Remove the cap and valve core to release the air from the tire.
NOTICE:
Keep the removed cap and valve core.
(b) After ensuring that a sufficient amount of air has been rele ...
Diagnostic Trouble Code Chart
DIAGNOSTIC TROUBLE CODE CHART
VSC System
DTC Code
Detection Item
See page
C1201
Engine Control System Malfunction
C1203
ECM Communication Circuit Malfunction
C120B
...