Toyota Tacoma (2015-2018) Service Manual: Microphone Amplifier

Toyota Tacoma (2015-2018) Service Manual / Audio / Video / Microphone Amplifier

Components

COMPONENTS

ILLUSTRATION

*A	w/o Sliding Roof	*B	w/ Sliding Roof
*1	TELEPHONE MICROPHONE ASSEMBLY	-	-

Removal

REMOVAL

PROCEDURE

1. REMOVE ROOF HEADLINING ASSEMBLY (for Double Cab)

Click here 2. REMOVE ROOF HEADLINING ASSEMBLY (for Access Cab)

2. REMOVE ROOF HEADLINING ASSEMBLY (for Access Cab)

Click here 3. REMOVE TELEPHONE MICROPHONE ASSEMBLY

3. REMOVE TELEPHONE MICROPHONE ASSEMBLY

(a) Disconnect the connector.

*A	w/o Sliding Roof
*B	w/ Sliding Roof

(b) Disengage the 2 claws to remove the telephone microphone assembly.

Installation

INSTALLATION

PROCEDURE

1. INSTALL TELEPHONE MICROPHONE ASSEMBLY

(a) Engage the 2 claws to install the telephone microphone assembly.

(b) Connect the connector.

2. INSTALL ROOF HEADLINING ASSEMBLY (for Double Cab)

Click here 3. INSTALL ROOF HEADLINING ASSEMBLY (for Access Cab)

3. INSTALL ROOF HEADLINING ASSEMBLY (for Access Cab)

Click here Noise Filter(for 2gr-fks)

Installation

INSTALLATION PROCEDURE 1. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY RH (a) Connect the connector. (b) Install the front No. 2 speaker assembly RH with the 2 bolts. Torque: 8.4 N·m {86 kgf·cm, 74 i ...

Noise Filter(for 2gr-fks)

Components COMPONENTS ILLUSTRATION Removal REMOVAL PROCEDURE 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 2. REMOVE V-BANK COVER (See page ) 3. REMOVE AIR CLEANER ASSEMBLY (See ...

Other materials:

Front Camera Module Incorrect Axial Gap (C1AA8,C1AA9)
DESCRIPTION If the forward recognition camera detects that the forward recognition camera axis has deviated, DTC C1AA8 is stored. Also, if Forward Recognition Camera Axis Adjustment is not performed after installing the forward recognition camera, DTC C1AA9 is stored. DTC No. ...

Inspection
INSPECTION PROCEDURE 1. INSPECT REAR NO. 2 POWER WINDOW REGULATOR SWITCH ASSEMBLY *a Component without harness connected (Rear No. 2 Power Window Regulator Switch Assembly) *b Pull (Close) *c Push (Open) ...

Acceleration Sensor Internal Circuit (C1419,C1435)
DESCRIPTION The skid control ECU (brake actuator assembly) receives signals from the yaw rate and acceleration sensor (airbag sensor assembly) via the CAN communication system. The airbag sensor assembly has a built-in yaw rate and acceleration sensor and detects the vehicle condition. If t ...