Toyota Tacoma manuals

Toyota Tacoma (2015-2018) Service Manual: Magnetic Clutch Relay

Inspection

INSPECTION

PROCEDURE

1. INSPECT MAGNET-CLUTCH RELAY

(a) Check the resistance.

(1) Using an ohmmeter, measure the resistance between the terminals.

Standard:

Tester Connection

Specified Condition

3 - 5

10 kΩ or higher

3 - 5

Below 1 Ω

(Apply battery voltage to terminals 1 and 2)

If the result is not as specified, replace the relay.

Heater Relay
Inspection INSPECTION PROCEDURE 1. INSPECT HEATER RELAY (a) Check the resistance. (1) Using an ohmmeter, measure the resistance between each terminal. Standard: ...

Ptc Heater Assembly
Components COMPONENTS ILLUSTRATION Removal REMOVAL PROCEDURE 1. REMOVE LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY (See page ) 2. REMOVE INSTRUMENT LOWER PANEL ASSEMBLY 3. REMOVE ...

Other materials:

Disassembly
DISASSEMBLY PROCEDURE 1. REMOVE CONSOLE COMPARTMENT DOOR CUSHION HINT: Use the same procedure as for the opposite side. (a) Disengage the claw to remove the console compartment door cushion. 2. REMOVE CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY ...

Disassembly
DISASSEMBLY PROCEDURE 1. REMOVE SHIFT LOCK RELEASE BUTTON COVER (a) Using a screwdriver with its tip wrapped in protective tape, detach the 2 claws to remove the shift lock release button cover from the console upper panel sub-assembly. Text in Illustration *a Protect ...

Lost Communication with ECM (C1437)
DESCRIPTION The skid control ECU (master cylinder solenoid) receives signals from the ECM via the CAN communication system. DTC Code DTC Detection Condition Trouble Area C1437 When the IG1 terminal voltage is 10 V or higher and the veh ...

© 2011-2024 Copyright www.ttguide.net