Toyota Tacoma 2015-2018 Service Manual: Lost Communication with ECM / PCM "A" (U0100-U0142,U0155)

Toyota Tacoma 2015-2018 Service Manual / Park Assist / Monitoring / Intuitive Parking Assist System / Lost Communication with ECM / PCM "A" (U0100-U0142,U0155)

DESCRIPTION

These DTCs are stored when the clearance warning ECU assembly cannot receive and recognize several signals via the CAN communication system.

DTC No.	DTC Detection Condition	Trouble Area
U0100	Lost Communication with ECM / PCM "A"	CAN communication system
U0101	Lost Communication with TCM
U0142	Lost Communication with Body Control Module "B"
U0155	Lost Communication with Instrument Panel Cluster Control Module (Combination Meter)

HINT:

When 2 or more DTCs starting with "U" are output simultaneously, inspect the connectors and wire harnesses of each ECU.

PROCEDURE

1.	CHECK DTC OUTPUT

(a) Clear the DTCs (See page (b) Check for DTCs (See page ). ).

(b) Check for DTCs (See page Result ).

Result

Result	Proceed to
DTCs (CAN communication system DTC) are output	A
No DTCs are output	B

GO TO CAN COMMUNICATION SYSTEM

USE SIMULATION METHOD TO CHECK

Diagnostic Trouble Code Chart

DIAGNOSTIC TROUBLE CODE CHART Intuitive Parking Assist System DTC Code Detection Item See page C1AE6 Rear Left Sensor Malfunction ...

Rear Right Center Sensor Malfunction (C1AE8)

DESCRIPTION The No. 1 ultrasonic sensor (rear center sensor RH) is installed on the rear bumper. The ECU detects obstacles based on signals received from the No. 1 ultrasonic sensor (rear center ...

Other materials:

Precaution
PRECAUTION 1. BASIC REPAIR HINT (a) HINTS ON OPERATIONS 1 Attire Always wear a clean uniform. A hat and safety shoes must be worn. 2 Vehicle protection Prepare a grille cover, fe ...

Key information
The following keys are provided with the vehicle. Vehicles without engine immobilizer system Master keys Key number plate Vehicles with engine immobilizer system Master keys Key number plate ■Key number plate Keep the plate in a safe place such as your wallet, not in the v ...

Power Outlet Socket(for Front Side)
Components COMPONENTS ILLUSTRATION Removal REMOVAL PROCEDURE 1. REMOVE INSTRUMENT PANEL LOWER CENTER FINISH PANEL (See page ) 2. REMOVE NO. 1 POWER OUTLET SOCKET ASSEMBLY (a) Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws to remove t ...