Toyota Tacoma (2015-2018) Service Manual: License Plate Light Assembly
Components
COMPONENTS
ILLUSTRATION
Removal
REMOVAL
CAUTION / NOTICE / HINT
HINT:
- Use the same procedure for both the LH and RH sides.
- The procedure described below is for the LH side.
PROCEDURE
1. REMOVE LICENSE PLATE LIGHT ASSEMBLY
|
(a) Disconnect the connector. |
|
(b) Disengage the 2 claws and guide to remove the license plate light assembly.
2. REMOVE LICENSE PLATE LIGHT BULB
|
(a) Turn the license plate light socket with the license plate light bulb in the direction indicated by the arrow shown in the illustration to remove them. |
|
(b) Remove the license plate light bulb from the license plate light socket.
Installation
INSTALLATION
CAUTION / NOTICE / HINT
HINT:
- Use the same procedure for both the LH and RH sides.
- The procedure described below is for the LH side.
PROCEDURE
1. INSTALL LICENSE PLATE LIGHT BULB
(a) Install the license plate light bulb to the license plate light socket.
|
(b) Turn the license plate light socket with the license plate light bulb in the direction indicated by the arrow shown in the illustration to install them. |
|
2. INSTALL LICENSE PLATE LIGHT ASSEMBLY
(a) Engage the guide and 2 claws to install the license plate light assembly.
Interior Illumination Light
Components
COMPONENTS
ILLUSTRATION
Removal
REMOVAL
PROCEDURE
1. REMOVE INSTRUMENT PANEL LOWER CENTER FINISH PANEL
(See page )
2. REMOVE NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY
...
Lighting System
...
Other materials:
Engine Coolant Temperature Sensor
Components
COMPONENTS
ILLUSTRATION
Inspection
INSPECTION
PROCEDURE
1. INSPECT ENGINE COOLANT TEMPERATURE SENSOR
(a) Partially immerse the engine coolant temperature sensor in water and warm
up the water.
(b) Measure the resistance according to the value(s) in the table bel ...
Receiver Error (C2176/76)
DESCRIPTION
Tire pressure warning valve and transmitter signals are transmitted to the tire
pressure warning ECU and receiver in the vehicle as radio waves.
DTC No.
Detection Item
DTC Detection Condition
Trouble Area
Note
C2 ...
Air Mix Damper Position Sensor Circuit (Driver Side) (B1436/36)
DESCRIPTION
This sensor detects the position of the air mix damper (for driver side) and
sends the appropriate signals to the air conditioning amplifier assembly. The position
sensor is built into the No. 3 air conditioning radiator damper servo sub-assembly
(for driver side air mix).
...
