INSTALLATION
CAUTION / NOTICE / HINT
NOTICE:
Replace the blind spot monitor sensor if it has been dropped or subjected to a severe impact.
PROCEDURE
1. INSTALL BLIND SPOT MONITOR SENSOR LH
(a) Install the blind spot monitor sensor LH with the 3 nuts.
Torque:
9.0 N·m {92 kgf·cm, 80 in·lbf}
(b) Connect the connector.
2. INSTALL BLIND SPOT MONITOR SENSOR RH
HINT:
Use the same procedure as for the LH side.
3. PERFORM BLIND SPOT MONITOR BEAM AXIS INSPECTION
(See page )
4. PERFORM DIAGNOSTIC SYSTEM CHECK
(See page )
5. INSTALL REAR BUMPER EXTENSION LH (w/ Towing Package)
(See page )
6. INSTALL REAR BUMPER EXTENSION LH (w/o Towing Package)
(See page )
7. INSTALL REAR BUMPER EXTENSION RH (w/ Towing Package)
HINT:
Use the same procedure as for the LH side.
8. INSTALL REAR BUMPER EXTENSION RH (w/o Towing Package)
HINT:
Use the same procedure as for the LH side.
9. INSTALL REAR BUMPER PAD SUB-ASSEMBLY (w/ Towing Package)
(See page )
10. INSTALL REAR BUMPER PAD SUB-ASSEMBLY (w/o Towing Package)
(See page )
11. INSTALL CONNECTOR COVER (w/ Towing Package)
(See page )
12. INSTALL REAR BUMPER HOLE COVER (w/o Towing Package)
(See page )
13. INSTALL REAR BUMPER ASSEMBLY (w/ Towing Package)
HINT:
(See page )
14. INSTALL REAR BUMPER ASSEMBLY (w/o Towing Package)
HINT:
(See page )
Setup menu
You can adjust the multimedia system to your desired settings.
Display “Setup” screen
Press the “SETUP” button to display the “Setup” screen.
Select to adjust the settings for
operation sounds, screen animation, etc.
Select to set the voice settings.
Select to adjust the sett ...
Problem Symptoms Table
PROBLEM SYMPTOMS TABLE
HINT:
Use the table below to help determine the cause of problem symptoms.
If multiple suspected areas are listed, the potential causes of the symptoms
are listed in order of probability in the "Suspected Area" column of the
table. Check each sy ...
Wireless Door Lock Tuner Circuit Malfunction (B1242)
DESCRIPTION
The door control receiver is used to receive radio waves relating to the entry
functions of the electrical key transmitter sub-assembly. The certification ECU
(smart key ECU assembly) decodes the requested electrical key transmitter sub-assembly
by identifying a key code based on ...