Toyota Tacoma (2015-2018) Service Manual: Installation
INSTALLATION
CAUTION / NOTICE / HINT
HINT:
- Use the same procedure for both the RH and LH sides.
- The procedure described below is for the LH side.
PROCEDURE
1. INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY
(a) Insert the 6 hooks, install 7 new bolts, 2 new clips (A) with pins and 2 new spacers, and engage 2 clips (B) to install the curtain shield airbag assembly.
Text in Illustration
|
*1 |
Spacer |
- |
- |
|
*a |
Pin |
*b |
Clip (A) |
|
*c |
Hook |
- |
- |
Torque:
12.5 N·m {127 kgf·cm, 9 ft·lbf}
NOTICE:
Do not twist the curtain shield airbag assembly.
|
(b) Connect the airbag connector to the curtain shield airbag assembly. NOTICE: When handling the airbag connector, take care not to damage the airbag wire harness. |
|
(c) Push in the airbag connector lock to install the airbag connector.
2. INSTALL ROOF HEADLINING ASSEMBLY
Click here .gif)
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque:
5.4 N·m {55 kgf·cm, 48 in·lbf}
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
Click here
4. INSPECT SRS WARNING LIGHT
Click here
Disposal
DISPOSAL
CAUTION / NOTICE / HINT
CAUTION:
Before performing pre-disposal deployment of any SRS part, review and closely
follow all applicable environmental and hazardous material regulations. Pre ...
Other materials:
Lost Communication with ECM (U0100,U0142,U0155)
DESCRIPTION
DTC No.
DTC Detecting Condition
Trouble Area
U0100
No communication with ECM
CAN communication system
ECM
U0142
No communication with main body ECU
...
Diagnosis System
DIAGNOSIS SYSTEM
1. DESCRIPTION
(a) The steering lock ECU (steering lock actuator or UPR bracket assembly) stores
DTCs when a malfunction occurs in the system. These DTCs can be confirmed by using
the Techstream.
NOTICE:
When using the Techstream with the engine switch off to confirm ...
Front Camera Module Incorrect Axial Gap (C1AA8,C1AA9)
DESCRIPTION
If the forward recognition camera detects that the forward recognition camera
axis has deviated, DTC C1AA8 is stored. Also, if Forward Recognition Camera Axis
Adjustment is not performed after installing the forward recognition camera, DTC
C1AA9 is stored.
DTC No.
...
