Toyota Tacoma manuals

Toyota Tacoma (2015-2018) Service Manual: Installation

INSTALLATION

CAUTION / NOTICE / HINT

HINT:

  • Use the same procedure for the RH side and LH side.
  • The following procedure is for the LH side.
  • When installing a new front fender wheel opening moulding or quarter panel wheel opening moulding, heat the vehicle body and front fender wheel opening moulding or quarter panel wheel opening moulding using a heat light.
Heating Temperature

Item

Temperature

Vehicle Body

40 to 60°C (104 to 140°F)

Front Fender Wheel Opening Moulding or Quarter Panel Wheel Opening Moulding

20 to 30°C (68 to 86°F)

NOTICE:

Do not heat the vehicle body or front fender wheel opening moulding or quarter panel wheel opening moulding excessively.

PROCEDURE

1. INSTALL FRONT FENDER WHEEL OPENING MOULDING (w/ Mudguard)

(a) Clean the vehicle body surface.

(1) Using a heat light, heat the vehicle body surface.

(2) Remove the double-sided tape from the vehicle body.

(3) Wipe off any tape adhesive residue with cleaner.

(b) Install the front fender wheel opening moulding.

(1) Using a heat light, heat the vehicle body and front fender wheel opening moulding.

(2) Remove the release paper from the front fender wheel opening moulding.

HINT:

After removing the release paper, keep the exposed adhesive free from foreign matter.

(3) Engage the 3 claws and 9 clips to install the front fender wheel opening moulding.

(4) Install the 7 screws.

2. INSTALL FRONT FENDER WHEEL OPENING MOULDING (w/o Mudguard)

(a) Clean the vehicle body surface.

(1) Using a heat light, heat the vehicle body surface.

(2) Remove the double-sided tape from the vehicle body.

(3) Wipe off any tape adhesive residue with cleaner.

(b) Install the front fender wheel opening moulding.

(1) Using a heat light, heat the vehicle body and front fender wheel opening moulding.

(2) Remove the release paper from the front fender wheel opening moulding.

HINT:

After removing the release paper, keep the exposed adhesive free from foreign matter.

(3) Engage the 3 claws and 9 clips to install the front fender wheel opening moulding.

(4) Install the 4 screws.

3. INSTALL FRONT FENDER MUDGUARD (w/ Mudguard)

(See page 4. INSTALL QUARTER PANEL WHEEL OPENING MOULDING (w/ Mudguard) )

4. INSTALL QUARTER PANEL WHEEL OPENING MOULDING (w/ Mudguard)

(a) Clean the vehicle body surface.

(1) Using a heat light, heat the vehicle body surface.

(2) Remove the double-sided tape from the vehicle body.

(3) Wipe off any tape adhesive residue with cleaner.

(b) Install the quarter panel wheel opening moulding.

(1) Using a heat light, heat the vehicle body and quarter panel wheel opening moulding.

(2) Remove the release paper from the quarter panel wheel opening moulding.

HINT:

After removing the release paper, keep the exposed adhesive free from foreign matter.

(3) Engage the 10 clips to install the quarter panel wheel opening moulding.

(4) Install the 3 screws.

5. INSTALL QUARTER PANEL WHEEL OPENING MOULDING (w/o Mudguard)

(a) Clean the vehicle body surface.

(1) Using a heat light, heat the vehicle body surface.

(2) Remove the double-sided tape from the vehicle body.

(3) Wipe off any tape adhesive residue with cleaner.

(b) Install the quarter panel wheel opening moulding.

(1) Using a heat light, heat the vehicle body and quarter panel wheel opening moulding.

(2) Remove the release paper from the quarter panel wheel opening moulding.

HINT:

After removing the release paper, keep the exposed adhesive free from foreign matter.

(3) Engage the 10 clips to install the quarter panel wheel opening moulding.

(4) Install the 7 screws.

6. INSTALL REAR QUARTER PANEL MUDGUARD (w/ Mudguard)

(See page Horn )

Removal
REMOVAL CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH side and LH side. The following procedure is for the LH side. When removing the front fender wheel opening mo ...

Horn
...

Other materials:

How To Proceed With Troubleshooting
CAUTION / NOTICE / HINT HINT: Use these procedures to troubleshoot the lane departure alert system. *: Use the Techstream. PROCEDURE 1. VEHICLE BROUGHT TO WORKSHOP NEXT ...

Fail-safe Chart
FAIL-SAFE CHART 1. Fail-safe This function minimizes the loss of operation when any abnormality occurs in a sensor or solenoid. Fail-safe Control List Malfunction Part Function Transmission revolution sensor (NT) During a transmission revolutio ...

Touch Panel Switch does not Function
PROCEDURE 1. CHECK MULTI-DISPLAY (a) Check if there is any foreign matter caught between the display and exterior frame of the multi-display. OK: No foreign matter is caught between the display and exterior frame of the multi-display. HINT: If there is foreig ...

© 2011-2024 Copyright www.ttguide.net