INSTALLATION
CAUTION / NOTICE / HINT
HINT:
The following procedures are for BD20 (w/o Differential Lock).
PROCEDURE
1. INSTALL REAR DIFFERENTIAL CARRIER ASSEMBLY
(a) Clean the contact surfaces of the rear differential carrier assembly and axle housing.
(b) Install the rear differential carrier assembly, a new rear differential carrier gasket and the washers with the 10 nuts. Text in Illustration
Torque: for Type A : 25 N·m {255 kgf·cm, 18 ft·lbf} for Type B : 37 N·m {377 kgf·cm, 27 ft·lbf} CAUTION: The rear differential carrier assembly is a heavy component. Make sure that it is supported securely. NOTICE:
|
|
2. INSTALL REAR AXLE SHAFT WITH BACKING PLATE LH
(See page )
3. INSTALL REAR AXLE SHAFT WITH BACKING PLATE RH
HINT:
Use the same procedure described for the LH side.
4. BLEED AIR FROM BRAKE LINE (for Hydraulic Brake Booster)
(See page )
5. BLEED AIR FROM BRAKE LINE (for Vacuum Brake Booster)
(See page )
6. ADD DIFFERENTIAL OIL
(See page )
7. INSTALL REAR PROPELLER SHAFT ASSEMBLY (for 2WD)
(See page )
8. INSTALL REAR PROPELLER SHAFT ASSEMBLY (for 4WD)
(See page )
9. ADJUST PARKING BRAKE
(See page )
10. INSTALL REAR WHEELS
Torque:
113 N·m {1152 kgf·cm, 83 ft·lbf}
11. CHECK ABS SPEED SENSOR SIGNAL (for Hydraulic Brake Booster)
(See page )
12. CHECK ABS SPEED SENSOR SIGNAL (for Vacuum Brake Booster)
(See page )
Definition Of Terms
DEFINITION OF TERMS
Term
Definition
Monitor description
Description of what the ECM monitors and how it detects malfunctions
(monitoring purpose and details).
Related DTCs
Group of diagnostic trouble codes that are ou ...
Components
COMPONENTS
ILLUSTRATION
*1
FUEL PUMP ASSEMBLY
*2
FUEL PUMP LIFTER ASSEMBLY
*3
FUEL PUMP LIFTER GUIDE
*4
FUEL PUMP SPACER GASKET
*5
NO. 1 FUEL PIPE SUB-ASSEMBLY
*6
...
System Description
SYSTEM DESCRIPTION
1. NAVIGATION SYSTEM OUTLINE
(a) Vehicle position tracking methods
It is essential that the navigation system correctly tracks the current vehicle
position and displays it on the map. There are 2 methods to track the current vehicle
position: autonomous (dead reckoning) and ...