Toyota Tacoma manuals

Toyota Tacoma 2015-2018 Service Manual: Inspection

INSPECTION

PROCEDURE

1. INSPECT BRAKE CYLINDER AND PISTON

(a) Check the cylinder bore and piston for rust and scoring.

2. INSPECT PAD LINING THICKNESS

(a) Using a ruler, measure the pad lining thickness.

(a) Using a ruler, measure the pad lining thickness.

Standard thickness:

11.5 mm (0.453 in.)

Minimum thickness:

1.0 mm (0.0394 in.)

Removal
REMOVAL CAUTION / NOTICE / HINT HINT: Use the same procedure for the LH side and RH side. The following procedure listed is for the LH side. PROCEDURE 1. REMOVE FRONT WHEEL 2. ...

Installation
INSTALLATION PROCEDURE 1. INSTALL FRONT DISC (a) Align the matchmarks of the front disc and the front axle hub and install the front disc. Text in Illustration ...

Other materials:

Yaw Rate Sensor (C1A46)
DESCRIPTION If the millimeter wave radar sensor assembly receives a yaw rate sensor malfunction signal from the yaw rate sensor (airbag sensor assembly) or yaw rate sensor zero point malfunction signal from the skid control ECU (master cylinder solenoid)*1 or skid control ECU (brake actuator ...

PTC Heater Circuit
DESCRIPTION PTC HTR heater relays are closed in accordance with signals from the air conditioning amplifier assembly and power is supplied to the quick heater assembly installed on the radiator heater unit. WIRING DIAGRAM CAUTION / NOTICE / HINT NOTICE: Inspect the fuses for circuits rela ...

Problem Symptoms Table
PROBLEM SYMPTOMS TABLE HINT: Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each sy ...

В© 2011-2022 Copyright www.ttguide.net