Toyota Tacoma manuals

Toyota Tacoma (2015-2018) Service Manual: Inspection

INSPECTION

PROCEDURE

1. INSPECT WINDSHIELD WIPER SWITCH ASSEMBLY

(a) Check the resistance.

Text in Illustration

*a

Component without harness connected

(Windshield Wiper Switch Assembly)

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Wiper Switch

Tester Connection

Switch Condition

Specified Condition

A-2 (+B) - A-3 (+1)

MIST

Below 1 Ω

A-1 (+S) - A-3 (+1)

OFF

A-1 (+S) - A-3 (+1)

INTO

A-2 (+B) - A-3 (+1)

LO

A-2 (+B) - A-4 (+2)

HI

Standard Resistance:

Front Washer Switch

Tester Connection

Switch Condition

Specified Condition

B-4 (EW) - B-7 (WF)

OFF

10 kΩ or higher

ON

Below 1 Ω

If the result is not as specified, replace the windshield wiper switch assembly.

Removal
REMOVAL PROCEDURE 1. REMOVE LOWER STEERING COLUMN COVER 2. REMOVE UPPER STEERING COLUMN COVER 3. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY (a) Disconnect the 2 connectors. Tex ...

Installation
INSTALLATION PROCEDURE 1. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY (a) Engage the claw to install the windshield wiper switch assembly. (b) Connect the 2 connectors. 2. INSTALL UPPER STEERING COL ...

Other materials:

Inspection
INSPECTION PROCEDURE 1. INSPECT BRAKE VACUUM CHECK VALVE ASSEMBLY (a) Check that there is ventilation from the booster to the engine, and no ventilation from the engine to the booster. If the results are not as specified, replace the vacuum check valve. ...

Removal
REMOVAL CAUTION / NOTICE / HINT NOTICE: If one of the camshaft timing gear bolts is already removed, do not remove any other camshaft timing gear bolts. PROCEDURE 1. REMOVE NO. 2 ENGINE UNDER COVER SUB-ASSEMBLY (w/ Off Road Package) 2. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY 3. REMOVE ...

Problem Symptoms Table
PROBLEM SYMPTOMS TABLE HINT: Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each sy ...

© 2011-2024 Copyright www.ttguide.net