Toyota Tacoma (2015-2018) Service Manual: Inspection

Toyota Tacoma (2015-2018) Service Manual / Ac60e Automatic Transmission / Transaxle / Park / Neutral Position Switch / Inspection

INSPECTION

PROCEDURE

1. INSPECT PARK/NEUTRAL POSITION SWITCH

(a) Measure the resistance according to the value(s) in the table below.

Text in Illustration

*a	Component without harness connected (Park/Neutral Position Switch)

Standard Resistance:

Tester Connection	Condition	Specified Condition
4 (B) - 5 (L)	Shift lever in P or N	Below 1 Ω
2 (RB) - 6 (PL)	Shift lever in P	Below 1 Ω
2 (RB) - 1 (RL)	Shift lever in R	Below 1 Ω
2 (RB) - 9 (NL)	Shift lever in N	Below 1 Ω
2 (RB) - 7 (DL)	Shift lever in D, S, "+" or "-"	Below 1 Ω
4 (B) - 5 (L)	Shift lever not in P or N	10 kΩ or higher
2 (RB) - 6 (PL)	Shift lever not in P	10 kΩ or higher
2 (RB) - 1 (RL)	Shift lever not in R	10 kΩ or higher
2 (RB) - 9 (NL)	Shift lever not in N	10 kΩ or higher
2 (RB) - 7 (DL)	Shift lever not in D, S, "+" or "-"	10 kΩ or higher

If the resistance value is not as specified, replace the park/neutral position switch.

Adjustment

ADJUSTMENT PROCEDURE 1. ADJUST PARK/NEUTRAL POSITION SWITCH (a) While pushing the shift lock release button, move the shift lever to N. (b) Remove the bolt of the park/neutral position switch. (c ...

Installation

INSTALLATION PROCEDURE 1. INSTALL PARK/NEUTRAL POSITION SWITCH HINT: Make sure that the manual valve lever shaft has not been rotated prior to installing the park/neutral position switch as the ...

Other materials:

Removal
REMOVAL PROCEDURE 1. REMOVE RADIATOR GRILLE (a) w/ Toyota Safety Sense P (1) Disconnect the connector. (2) Disengage the clamp. (b) Put protective tape around the radiator grille. ...

Traffic Information is not Displayed
CAUTION / NOTICE / HINT NOTICE: Traffic information requires payment. An "XM Nav Traffic" contract must be made between the satellite radio company and the user. If the contract expires, traffic information will not be available. Traffic information does not apply to ...

Invalid Data Received from Deceleration Sensor (C1442,C1443)
DESCRIPTION The skid control ECU (master cylinder solenoid) receives signals from the yaw rate and acceleration sensor (airbag sensor assembly) via the CAN communication system. The airbag sensor assembly has a built-in yaw rate and acceleration sensor. DTC Code DTC Dete ...