Toyota Tacoma manuals

Toyota Tacoma (2015-2018) Service Manual: Freeze Frame Data

FREEZE FRAME DATA

CHECK FREEZE FRAME DATA

HINT:

The ECU records vehicle and driving condition information as freeze frame data the moment a DTC is stored.

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn the Techstream on.

(d) Enter the following menus: Powertrain / Radar Cruise 1*1 or Radar Cruise 2*2 / Trouble Codes.

  • *1: Output from the ECM
  • *2: Output from the millimeter wave radar sensor assembly

(e) From the DTC screen, select the DTCs (with snow icon) for which freeze frame data is recorded.

LIST OF FREEZE FRAME DATA

(a) Radar Cruise 1:

Powertrain > Radar Cruise1

Tester Display

Cruise Vehicle Speed

Cruise Memory Vehicle Speed

Cruise Request Throttle Opening Angle

Cruise Target Acceleration

Driving Support ECU Target Acceleration

Cruise Request Driving Force

Cruise Request Driving Force Feedback Status

Cruise Control Permission Condition

Cruise Control Condition

Cruise Main Switch Operation Condition

Accelerator Pedal

Stop Light Switch Main--CPU

Stop Light Switch Sub-CPU

Request Manual Cancel

Request Automatic Cancel

Cruise Brake Control Decision

Cruise Brake Control Permission Condition

(b) Radar cruise 2:

Powertrain > Radar Cruise2

Tester Display

Cruise Control Mode

Vehicle Distance

Vehicle Acceleration

Closed Throttle Position

Forward Vhcl Relative Spd

Vehicle Approach Warning

Frnt Radar Sens Temp Hi

Front Radar Voltage

Dtc Check / Clear
DTC CHECK / CLEAR NOTICE: When the diagnosis system is changed from normal mode to check mode or vice versa, all DTCs and freeze frame data recorded in normal mode are cleared. Before changing m ...

Diagnostic Trouble Code Chart
DIAGNOSTIC TROUBLE CODE CHART Dynamic Radar Cruise Control System DTC No. Detection Item MIL Link C1A02 Vehicle Information No ...

Other materials:

Pressure Control Solenoid "G" Circuit Open (P280713)
DESCRIPTION Changing from 1st to 6th is performed by the ECM turning shift solenoid valves SL1, SL2, SL3 and SL4 on and off. If an open or short circuit occurs in any of the shift solenoid valves, the ECM controls the remaining normal shift solenoid valves to allow the vehicle to be operated ...

No Sound can be Heard from Speakers
PROCEDURE 1. CHECK AUDIO SETTINGS (a) Display the "Sound Settings" screen. (b) Set volume, fader and balance to the initial values and check that sound is normal. OK: Audio system returns to normal. HINT: Sound quality adjustment measures vary acco ...

LVDS Signal Malfunction (from Extension Module) (B1532,B156C)
DESCRIPTION DTC Code DTC Detection Condition Trouble Area B1532 When one of the conditions below is met: Video signal (digital) is lost. The stereo component tuner assembly is not connected while the ignition swi ...

В© 2011-2024 Copyright www.ttguide.net