FAIL-SAFE CHART
1. Fail-safe
This function minimizes the loss of operation when any abnormality occurs in a sensor or solenoid.
Fail-safe Control List
Malfunction Part |
Function |
---|---|
Transmission revolution sensor (NT) |
During a transmission revolution sensor (NT) malfunction, shift control is performed based on the transmission revolution sensor (SP2) signal. |
Transmission revolution sensor (SP2) |
During a transmission revolution sensor (SP2) malfunction, shift control is performed based on the wheel speed sensor signal. |
ATF temperature sensors (No. 1 and No. 2) |
During an ATF temperature sensor malfunction, up-shifting to 5th and 6th is prohibited. |
Shift solenoid valve SL1, SL2, SL3 and SL4 |
Stop the conduction of electric power to a failed solenoid and shift gears by turning on/off normal solenoids. If all solenoids are malfunctioning, gears will be selected through mechanical hydraulic circuits. |
Shift solenoid valve SLT |
During a shift solenoid valve SLT malfunction, the current to the shift solenoid valve is stopped. However, shifting is performed through normal clutch pressure control. |
Shift solenoid valve SLU |
During a shift solenoid valve SLU malfunction, the current to the shift solenoid valve is stopped. This stops lock-up control, thus decreasing fuel economy. |
Gear Position |
1st |
2nd |
3rd |
4th |
5th |
6th |
---|---|---|---|---|---|---|
Shift solenoid valve SL1 |
ON |
ON |
ON |
ON |
OFF |
OFF |
Shift solenoid valve SL2 |
OFF |
OFF |
OFF |
ON |
ON |
ON |
Shift solenoid valve SL3 |
OFF |
ON |
OFF |
OFF |
OFF |
ON |
Shift solenoid valve SL4 |
OFF |
OFF |
ON |
OFF |
ON |
OFF |
Gear Position under Normal Conditions |
1st |
2nd |
3rd |
4th |
5th |
6th |
|
---|---|---|---|---|---|---|---|
Shift solenoid valve SL1 |
ON Malfunction (without Fail-safe Control)* |
1st |
2nd |
3rd |
4th |
4th |
4th |
OFF Malfunction (without Fail-safe Control) |
1st to N |
2nd to N |
3rd to N |
4th to N |
5th |
6th |
|
Fail-safe Control during OFF Malfunction |
Fixed in 3rd or 5th |
||||||
Shift solenoid valve SL2 |
ON Malfunction (without Fail-safe Control)* |
1st to 4th |
2nd to 4th |
3rd to 4th |
4th |
5th |
6th |
OFF Malfunction (without Fail-safe Control) |
1st |
2nd |
3rd |
4th to 1st |
5th to N |
6th to N |
|
Fail-safe Control during OFF Malfunction |
Fixed in 2nd or 3rd |
||||||
Shift solenoid valve SL3 |
ON Malfunction (without Fail-safe Control)* |
1st to 2nd |
2nd |
3rd |
4th |
5th |
6th |
OFF Malfunction (without Fail-safe Control) |
1st |
2nd to 1st |
3rd |
4th |
5th |
6th to N |
|
Fail-safe Control during OFF Malfunction |
Fixed in 3rd |
||||||
Shift solenoid valve SL4 |
ON Malfunction (without Fail-safe Control)* |
3rd |
3rd |
3rd |
4th |
5th |
5th |
OFF Malfunction (without Fail-safe Control) |
1st |
2nd |
3rd to 1st |
4th |
5th to N |
6th |
|
Fail-safe Control during OFF Malfunction |
Fixed in 2nd |
Pressure Sensor or Switch (C1254)
DESCRIPTION
The accumulator pressure sensor is connected to the skid control ECU in the master
cylinder solenoid.
DTC No.
DTC Detecting Condition
Trouble Areas
C1254
Accumulator pressure sensor fault
(Fluid pressure does not chang ...
Adjustment
ADJUSTMENT
CAUTION / NOTICE / HINT
HINT:
Use the same procedures for both the LH and RH sides.
The procedure described below is for the LH side.
Centering bolts are used to mount the door hinge to the vehicle body
and door. The door cannot be adjusted with the centering bolts ...
SRS airbags
The SRS airbags inflate when the vehicle is subjected to certain types of severe
impacts that may cause significant injury to the occupants. They work together with
the seat belts to help reduce the risk of death or serious injury.
Front airbags
Driver airbag/front passenger airbag
Can he ...