Components
COMPONENTS
ILLUSTRATION
ILLUSTRATION
ILLUSTRATION
Inspection
INSPECTION
PROCEDURE
1. INSPECT OIL COOLER ASSEMBLY
(a) Check the oil cooler assembly for damage and clogging. If necessary, replace the oil cooler assembly. |
|
Installation
INSTALLATION
PROCEDURE
1. INSTALL OIL COOLER ASSEMBLY
(a) Install 2 new gaskets to the oil bracket sub-assembly.
(b) Install the oil cooler assembly with the 2 bolts and 2 nuts.
Torque:
21 N·m {214 kgf·cm, 15 ft·lbf}
2. CONNECT NO. 1 WATER BY-PASS PIPE SUB-ASSEMBLY
(a) Connect the No. 1 water by-pass pipe sub-assembly.
3. INSTALL FAN SHROUD
4. INSTALL NO. 1 RADIATOR HOSE
5. INSTALL V-BANK COVER SUB-ASSEMBLY
6. ADD ENGINE OIL
7. CHECK ENGINE OIL LEVEL
8. ADD ENGINE COOLANT
9. INSPECT FOR ENGINE OIL LEAK
10. INSPECT FOR COOLANT LEAK
11. INSTALL RADIATOR SUPPORT TO FRAME SEAL
12. INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY
13. INSTALL NO. 2 ENGINE UNDER COVER SUB-ASSEMBLY (w/ Off Road Package)
Removal
REMOVAL
PROCEDURE
1. REMOVE NO. 2 ENGINE UNDER COVER SUB-ASSEMBLY (w/ Off Road Package)
2. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY
3. REMOVE RADIATOR SUPPORT TO FRAME SEAL
4. DRAIN ENGINE COOLANT
5. DRAIN ENGINE OIL
6. REMOVE V-BANK COVER SUB-ASSEMBLY
7. REMOVE NO. 1 RADIATOR HOSE
8. REMOVE FAN SHROUD
9. DISCONNECT NO. 1 WATER BY-PASS PIPE SUB-ASSEMBLY
(a) Disconnect the No.1 water by-pass pipe sub-assembly.
10. REMOVE OIL COOLER ASSEMBLY
(a) Remove the 2 bolts, 2 nuts and oil cooler assembly. |
|
(b) Remove the 2 gaskets.
Fail-safe Chart
FAIL-SAFE CHART
1. Fail-safe
This function minimizes the loss of operation when any abnormality occurs in
a sensor or solenoid.
Fail-safe Control List
Malfunction Part
Function
Transmission revolution sensor (NT)
During a transmission revolutio ...
Room Temperature Sensor Circuit (B1411/11)
DESCRIPTION
The cooler thermistor (room temperature sensor) is installed in the instrument
panel to detect the cabin temperature which is used to control the air conditioning
system AUTO mode. The resistance of the cooler thermistor (room temperature sensor)
changes in accordance with the cab ...
Precaution
PRECAUTION
1. IGNITION SWITCH EXPRESSIONS
(a) The type of ignition switch used on this model differs according to the specifications
of the vehicle. The expressions listed in the table below are used in this section.
Expression
Ignition Switch (Position)
Engine ...