Toyota Tacoma (2015-2018) Service Manual: Engine Control System Malfunction (C1201)
DESCRIPTION
If a malfunction in the engine control system is detected, VSC and TRAC operations are prohibited by the fail-safe function.
|
DTC No. |
Detection Item |
DTC Detection Condition |
Trouble Area |
|---|---|---|---|
|
C1201 |
Engine Control System Malfunction |
A malfunction signal is received from the ECM. |
Engine control system |
PROCEDURE
|
1. |
CHECK DTC (ENGINE CONTROL SYSTEM) |
(a) Check if any engine control system DTC is output.
Result|
Result |
Proceed to |
|---|---|
|
DTC is not output |
A |
|
DTC is output |
B |
| A | .gif) |
USE SIMULATION METHOD TO CHECK |
| B | |
GO TO ENGINE CONTROL (DIAGNOSTIC TROUBLE CODE CHART) |
SM Solenoid Circuit (C1225,C1468,C1469,C146A,C146B)
DESCRIPTION
These solenoids turn on when signals are received from the skid control ECU (brake
actuator assembly) and they control the pressure acting on the wheel cylinders to
control the brakin ...
ECM Communication Circuit Malfunction (C1203)
DESCRIPTION
The circuit is used to send TRAC and VSC control information from the skid control
ECU (brake actuator assembly) to the ECM, and engine control information from the
ECM to the skid co ...
Other materials:
Front Floor Footrest
Components
COMPONENTS
ILLUSTRATION
Installation
INSTALLATION
PROCEDURE
1. INSTALL FRONT FLOOR FOOTREST
(a) Engage the 2 clips to install the front floor footrest.
2. INSTALL FRONT FLOOR CARPET ASSEMBLY
(a) Return the fron ...
How To Proceed With Troubleshooting
CAUTION / NOTICE / HINT
HINT:
Use these procedures to troubleshoot the key reminder warning system.
*: Use the Techstream.
PROCEDURE
1.
VEHICLE BROUGHT TO WORKSHOP
NEXT
...
Terminals Of Ecu
TERMINALS OF ECU
1. AIR CONDITIONING AMPLIFIER ASSEMBLY
HINT:
Check from the rear of the connector while it is connected to the air conditioning
amplifier assembly.
Terminal No.
(Symbol)
Wiring Color
Terminal Description
Condition
Spe ...
