DIAGNOSTIC TROUBLE CODE CHART
Navigation System
DTC Code |
Detection Item |
See page |
---|---|---|
B1324 |
Lost Communication with Meter |
|
B1532 |
LVDS Signal Malfunction (from Extension Module) |
|
B1551 |
HD Radio Tuner Malfunction |
|
B1552 |
Extension Module Malfunction |
|
B156C |
Extension Module Disconnected |
|
B1579 |
Voice Recognition Microphone Disconnected |
|
B1585 |
USB Media Malfunction |
|
B158A |
Extension Module Noise Adjustment Malfunction |
|
B158C |
SD Card Communication Malfunction |
|
B158F |
AV Signal Stoppage (Low Battery Voltage) |
|
B15A0 |
LAN Master Malfunction |
|
B15A3 |
Stereo Component Amplifier Malfunction |
|
B15AD |
Navigation Processor Malfunction |
|
B15B0 |
Display Screen Malfunction |
|
B15B3 |
Radio Tuner Malfunction |
|
B15B4 |
CD Changer Malfunction |
|
B15B7 |
Bluetooth Module Malfunction |
|
B15BA |
XM Tuner Malfunction |
|
B15C0 |
Short in GPS Antenna |
|
B15C1 |
Open in GPS Antenna |
|
B15C2 |
Speed Signal Malfunction |
|
B15C3 |
Speaker Output Short |
|
B15D3 |
Stereo Component Amplifier Disconnected |
|
B15F5 |
A/C ECU Vehicle Information Reading/Writing Processor Malfunction |
|
B15F6 |
Main Body ECU Vehicle Information Reading/Writing Process Malfunction |
|
B15F7 |
Certification ECU Vehicle Information Reading/Writing Process Malfunction |
|
B15FE |
XM Tuner Antenna Disconnected |
|
B15FF |
XM Tuner Antenna Short |
|
U0073 |
Sending Malfunction (Navigation to APGS) |
|
U0100 |
Lost Communication with ECM / PCM "A" |
|
U0129 |
Lost Communication with Brake System Control Module |
|
U0140 |
Lost Communication with Body Control Module |
|
U0155 |
Meter ECU Communication |
|
U0164 |
Lost Communication with A/C ECU |
|
Terminals Of Ecm
TERMINALS OF ECM
1. ECM
HINT:
The standard voltage between each pair of ECM terminals is shown in the table
below. In the table, first follow the information under "Condition". Look under
"Terminal No. (Symbol)" for the terminals to be inspected. The standard voltage
b ...
On-vehicle Inspection
ON-VEHICLE INSPECTION
PROCEDURE
1. INSPECT CAMSHAFT TIMING GEAR BOLT
(a) Remove the camshaft timing oil control solenoid assembly (See page
).
(b) Check that the plunger strokes when the plunger in the center of
the camshaft timing gear bolt is pressed.
Standard stroke:
4 ...
Acceleration Sensor Stuck Malfunction (C1232,C1243,C1245,C1279)
DESCRIPTION
The skid control ECU (master cylinder solenoid) receives signals from the yaw
rate and acceleration (airbag sensor assembly) via the CAN communication system.
The airbag sensor assembly has a built-in yaw rate and acceleration sensor and
detects the vehicle's condition using 2 ...