Toyota Tacoma (2015-2018) Service Manual: Diagnostic Trouble Code Chart
DIAGNOSTIC TROUBLE CODE CHART
Manual Transmission System|
DTC Code |
Detection Item |
MIL |
Memory |
See page |
|---|---|---|---|---|
|
P03352A |
Crankshaft Position Sensor "A" Signal Stuck in Range |
Does not come on |
DTC stored |
|
|
P033531 |
Crankshaft Position Sensor "A" No Signal |
Does not come on |
DTC stored |
|
|
P050031 |
Vehicle Speed Sensor "A" No Signal |
Does not come on |
DTC stored |
|
|
U010087 |
Lost Communication With ECM/PCM "A" Missing Message |
Does not come on |
DTC stored |
|
.gif)
Dtc Check / Clear
DTC CHECK / CLEAR
HINT:
DTCs which are stored in the ECM can be displayed on the Techstream.
The Techstream can display pending DTCs and current DTCs. Some DTCs
are not stored unl ...
Lost Communication With ECM/PCM "A" Missing Message (U010087)
DESCRIPTION
The engine control unit and transmission control unit are located inside the
ECM. The engine control unit intercommunicates with the transmission control ECU
via CAN communication. If ...
Other materials:
Parts Location
PARTS LOCATION
ILLUSTRATION
*1
SKID CONTROL ECU (BRAKE ACTUATOR ASSEMBLY)
*2
THROTTLE BODY WITH MOTOR ASSEMBLY
*3
PARK/NEUTRAL POSITION SWITCH
*4
VSC OFF SWITCH
*5
MILLIMETER ...
Yaw Rate Sensor Malfunction (C1436)
DESCRIPTION
The skid control ECU (brake actuator assembly) receives signals from the yaw
rate and acceleration sensor (airbag sensor assembly) via the CAN communication
system.
The airbag sensor assembly has a built-in yaw rate sensor and detects the vehicle
condition.
If there is trouble i ...
Engine Switch Illumination Circuit
DESCRIPTION
The illuminated entry system controls the engine switch illumination.
WIRING DIAGRAM
PROCEDURE
1.
READ VALUE USING TECHSTREAM (POWER/ENGINE SW LIGHT)
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch to ON.
(c) Turn the Techstream ...
