Inspection
INSPECTION
PROCEDURE
1. REMOVE DECK LIGHT RELAY
(a) Check the resistance.
(1) Measure the resistance according to the value(s) in the table below. Standard:
If the result is not as specified, replace the deck light relay. |
|
Precaution
PRECAUTION
HANDLING PRECAUTION FOR CRUISE CONTROL SYSTEM
(a) Turn the cruise control system off using the cruise control main switch (ON-OFF
button) when not using the cruise control system.
(b) Be careful as the vehicle speed increases when driving downhill with the
cruise control system con ...
Cellular Phone Registration Failure
PROCEDURE
1.
CHECK USAGE CONDITION
(a) Check that the vehicle and cellular phone meet the following conditions:
NOTICE:
If changing cellular phone settings, updating software, etc. is necessary, make
sure to obtain the permission of the customer before performin ...
Air Outlet Damper Position Sensor Circuit (B1433/33)
DESCRIPTION
This sensor detects the position of the mode damper and sends the appropriate
signals to the air conditioning amplifier assembly. The position sensor is built
into the No. 1 air conditioning radiator damper servo sub-assembly (for mode switching).
DTC No.
DTC ...