Toyota Tacoma (2015-2018) Service Manual: Customize Parameters
CUSTOMIZE PARAMETERS
PROCEDURE
1. CUSTOMIZE SLIDING ROOF SYSTEM
HINT:
The following items can be customized.
NOTICE:
- When the customer requests a change in a function, first make sure that the function(s) can be customized.
- Be sure to make notes of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
(a) Customizing with the Techstream
(1) Connect the Techstream to the DLC3.
(2) Turn the ignition switch to ON.
(3) Turn the Techstream on.
(4) Enter the following menus: Customize Setting / Slide Roof.
(5) Select the setting by referring to the table below.
|
Display |
Default |
Content |
Setting |
Relevant ECU |
|---|---|---|---|---|
|
Door Key Related Operation |
Slide |
Function to select tilt up or slide open of sliding roof key-linked function. |
Slide/Tilt |
Sliding roof ECU (Sliding roof drive gear sub-assembly) |
|
Wireless Key Related Operation |
Slide |
Function to select tilt up or slide open of sliding roof wireless transmitter-linked function. |
Slide/Tilt |
Sliding roof ECU (Sliding roof drive gear sub-assembly) |
|
Front SW Auto Operation |
ON |
This function is used to enable or disable the auto operation. |
OFF/ON |
Sliding roof ECU (Sliding roof drive gear sub-assembly) |
(6) Enter the following menus: Customize Setting / Security.
(7) Select the setting by referring to the table below.
|
Display |
Default |
Content |
Setting |
Relevant ECU |
|---|---|---|---|---|
|
Slide Roof Open Warning |
ON |
This function is used to enable or disable the sliding roof open warning. |
OFF/ON |
Main body ECU (Multiplex network body ECU) |
System Diagram
SYSTEM DIAGRAM
...
How To Proceed With Troubleshooting
CAUTION / NOTICE / HINT
HINT:
Use the following procedure to troubleshoot the sliding roof system.
*: Use the Techstream.
PROCEDURE
1.
VEHICLE BROUGHT T ...
Other materials:
System Description
SYSTEM DESCRIPTION
1. POWER WINDOW CONTROL SYSTEM DESCRIPTION
(a) The power window control system controls the power window operation using
the power window regulator motors. The main controls of this system are the power
window regulator master switch assembly (mounted on the driver door), po ...
Installation
INSTALLATION
PROCEDURE
1. INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY
(a) Connect the airbag connector.
NOTICE:
When handling the airbag connector, take care not to damage the airbag
wire harness.
(b) Push in the airbag conn ...
Installation
INSTALLATION
CAUTION / NOTICE / HINT
HINT:
Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
PROCEDURE
1. INSTALL FRONT DOOR GLASS OUTER WEATHERSTRIP ASSEMBLY
(a) Engage the 5 claws to install the front door glass outer ...
