CUSTOMIZE PARAMETERS
1. CUSTOMIZE METER / GAUGE SYSTEM
(a) Customizing with the Techstream
(1) Connect the Techstream to the DLC3.
(2) Turn the ignition switch to ON.
(3) Turn the Techstream on.
(4) Enter the following menus: Customize Setting / Warning or Display.
(5) Select the setting by referring to the table below.
NOTICE:
Record the current settings before customizing.
Warning
Display |
Default |
Content |
Setting |
Relevant ECU |
---|---|---|---|---|
Key Remind Volume |
Large |
Function to change the volume of the key reminder buzzer. |
Large,Medium,Small |
Combination meter assembly |
Key Remind Sound |
Normal |
Function to change the frequency of the key reminder buzzer. |
Normal,Slow,Fast |
Combination meter assembly |
Display |
Default |
Content |
Setting |
Relevant ECU |
---|---|---|---|---|
ODO Display Time After IG OFF Setting |
30s |
Function to change the ODO Display Time After IG OFF Setting. |
30s,60s,600s,OFF |
Combination meter assembly |
Reservoir Level Switch Disconnected (C1453,C1454)
DESCRIPTION
The brake fluid level warning switch sends the appropriate signal to the skid
control ECU (master cylinder solenoid) when the brake fluid level drops.
DTC Code
DTC Detection Condition
Trouble Area
C1453
With the ECU termina ...
Data List / Active Test
DATA LIST / ACTIVE TEST
READ DATA LIST
NOTICE:
In the table below, the values listed under "Normal Condition" are reference
values. Do not depend solely on these reference values when deciding whether a part
is faulty or not.
HINT:
Using the Techstream to read the Data List allows ...
Data List / Active Test
DATA LIST / ACTIVE TEST
1. DATA LIST
HINT:
Using the Techstream to read the Data List allows the values or states of switches,
sensors, actuators and other items to be read without removing any parts. This non-intrusive
inspection can be very useful because intermittent conditions or signals ...