Toyota Tacoma (2015-2018) Service Manual: Components
COMPONENTS
ILLUSTRATION
|
*A |
w/o Navigation System |
*B |
w/ Navigation System |
|
*C |
for Double Cab |
*D |
for Acces Cab |
|
*E |
for 4WD |
- |
- |
|
*1 |
AIR CONDITIONING CONTROL ASSEMBLY |
*2 |
COWL SIDE TRIM BOARD LH |
|
*3 |
ENGINE SWITCH |
*4 |
FRONT DOOR SCUFF PLATE LH |
|
*5 |
INSTRUMENT CLUSTER CENTER FINISH PANEL SUB-ASSEMBLY |
*6 |
INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY |
|
*7 |
INSTRUMENT PANEL LOWER FINISH PANEL SUB-ASSEMBLY |
*8 |
NAVIGATION RECEIVER ASSEMBLY WITH BRACKET |
|
*9 |
RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET |
*10 |
TRANSFER POSITION SWITCH |
Inspection
INSPECTION
PROCEDURE
1. INSPECT AIR CONDITIONING CONTROL ASSEMBLY
(a) Check the blower switch resistance.
(1) Measure the resistance according to the value(s) in the table below.
T ...
Other materials:
Pressure Control Solenoid "A" Performance (Shift Solenoid Valve SL1) (P0746)
SYSTEM DESCRIPTION
The ECM uses the vehicle speed signal and signals from the transmission revolution
sensors (NT, SP2) to detect the actual gear (1st, 2nd, 3rd, 4th, 5th or 6th gear).
The ECM compares the actual gear with the shift schedule in the ECM memory to
detect mechanical problems of t ...
Yaw Rate Sensor (C1A46)
DESCRIPTION
If the millimeter wave radar sensor assembly receives a yaw rate sensor malfunction
signal from the yaw rate sensor (airbag sensor assembly) or yaw rate sensor zero
point malfunction signal from the skid control ECU (master cylinder solenoid)*1
or skid control ECU (brake actuator ...
Reassembly
REASSEMBLY
CAUTION / NOTICE / HINT
CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
PROCEDURE
1. INSTALL SEPARATE TYPE REAR SEATBACK COVER
(a) Using hog ring pliers, install the separate type rear seatback cover
with 2 new hog rings.
Text in Il ...
