COMPONENTS
ILLUSTRATION
*A |
for Type A |
*B |
for Type B |
*C |
for Type C |
- |
- |
*1 |
MILLIMETER WAVE RADAR SENSOR ASSEMBLY |
*2 |
MILLIMETER WAVE RADAR WIRE |
N*m (kgf*cm, ft.*lbf): Specified torque |
- |
- |
Open in Stop Light Switch Circuit (C1425)
DESCRIPTION
The skid control ECU (master cylinder solenoid) inputs stop light switch signals
and the brake operation condition.
The skid control ECU (master cylinder solenoid) has an open detection circuit,
which outputs this DTC when detecting an open circuit in the stop light input line
or ...
Inspection
INSPECTION
PROCEDURE
1. INSPECT TRANSMISSION FLOOR SHIFT ASSEMBLY (w/o Smart Key System)
HINT:
If the results of the following inspections are as specified but a malfunction
has occurred, replace the transmission floor shift assembly.
(a) Inspect the wire harness.
(1) Disconnect the shift lo ...
Disassembly
DISASSEMBLY
PROCEDURE
1. INSPECT 3RD GEAR THRUST CLEARANCE
(a) Using a dial indicator, measure the 3rd gear thrust clearance.
Standard clearance:
0.200 to 0.490 mm (0.0079 to 0.0192 in.)
If the clearance is outside the specification, replace the 3rd gear,
thrust washer, c ...