PROCEDURE
1. |
CHECK OPERATION |
(a) Place the cellular phone close to the navigation receiver assembly.
(b) Check if the cellular phone can be registered.
OK:
The cellular phone can be registered.
OK |
NORMAL OPERATION |
|
2. |
CHECK CURRENT CONDITIONS |
(a) Proceed to the next step according to the table below.
Result
Result |
Proceed to |
---|---|
Another "Bluetooth" compatible cellular phone is available |
A |
Another "Bluetooth" compatible vehicle is available |
B |
None of the above |
C |
B |
GO TO STEP 4 |
C |
GO TO STEP 5 |
|
3. |
CHECK USING ANOTHER CELLULAR PHONE |
(a) Check if the system functions using another "Bluetooth" compatible cellular phone.
HINT:
OK:
The system functions.
OK |
USE A "Bluetooth" COMPATIBLE CELLULAR PHONE |
NG |
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE |
4. |
CHECK USING ANOTHER "Bluetooth" COMPATIBLE VEHICLE |
(a) Register the cellular phone with another vehicle and check if the system functions normally.
HINT:
Depending on the version, some "Bluetooth" compatible cellular phones cannot be used.
OK:
The system functions.
OK |
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE |
NG |
ASK CUSTOMER TO UPDATE CELLULAR PHONE OR CHANGE IT TO A "Bluetooth" COMPATIBLE MODEL |
5. |
CHECK USING ANOTHER CELLULAR PHONE |
(a) Check if the system functions using another "Bluetooth" compatible cellular phone.
HINT:
OK:
The system functions.
OK |
USE A "Bluetooth" COMPATIBLE CELLULAR PHONE |
|
6. |
CHECK CELLULAR PHONE |
(a) Check if a call can be made from the cellular phone.
HINT:
The cellular phone is unable to call under any of the following conditions:
OK:
A call can be made from the cellular phone.
OK |
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE |
NG |
REPAIR OR REPLACE CELLULAR PHONE |
Washer Motor
Components
COMPONENTS
ILLUSTRATION
On-vehicle Inspection
ON-VEHICLE INSPECTION
PROCEDURE
1. INSPECT WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY
HINT:
This check should be performed with the windshield washer motor and pump assembly
installed to the windshield washer jar assembly.
...
How To Proceed With Troubleshooting
CAUTION / NOTICE / HINT
HINT:
Use the following procedure to troubleshoot the manual transaxle system.
*: Use the Techstream.
PROCEDURE
1.
VEHICLE BROUGHT TO WORKSHOP
NEXT
...
Dtc Check / Clear
DTC CHECK / CLEAR
1. START DIAGNOSTIC MODE
HINT:
Illustrations may differ from the actual vehicle screen depending on
the device settings and options. Therefore, some detailed areas may not
be shown exactly the same as on the actual vehicle screen.
If the system cannot enter d ...