Toyota Tacoma manuals

Toyota Tacoma (2005–2015) Owners Manual: Bottle holders

Front

Front console box (Separated type

front seat)Front console box (Separated type front seat)

Rear (Double Cab models)

Rear (Double Cab models)

■Bottle holders

■Bottle holders

Depending on their size or shape, some bottles may not fit in the holders.

NOTICE

■Items that should not be stowed in the bottle holders

Put the cap on before stowing a bottle. Do not place open bottles in the bottle holders, or glasses and paper cups containing liquid. The contents may spill and glasses may break.

Cup holders
Type A (Bench type front seat) Type B (Separated type front seats with an automatic transmission) Type C (Separated type front seats with a manual transmission) ■Removing the cup ...

Auxiliary boxes
Front Pull the lid down. Under the rear seats (Access Cab models) Pull up the lever. Raise the bottom cushion up. Turn the knob counterclockwise. Open the lid. Press the lid agai ...

Other materials:

Transfer System
Precaution PRECAUTION Before disassembly, clean the transfer assembly and remove any deposited sand and mud to prevent it from entering the transfer during disassembly and assembly. When removing any light alloy parts such as the transfer covers, do not pry them off with a ...

Removal
REMOVAL PROCEDURE 1. REMOVE FUEL PUMP ASSEMBLY (for High Pressure) (See page ) 2. REMOVE NO. 2 FUEL PIPE SUB-ASSEMBLY (a) Loosen the 2 union nuts and remove the No. 2 fuel pipe sub-assembly from the fuel delivery pipe RH and fuel delivery pipe sub-assembly LH. Text in Illustration ...

Short in Front Passenger Side Squib 2nd Step Circuit (B1815/54-B1818/54)
DESCRIPTION The front passenger side squib 2nd step circuit consists of the airbag sensor assembly and the instrument panel passenger without door airbag assembly. The circuit signals the SRS to deploy when airbag deployment conditions are met. These DTCs are set when a malfunction is detected ...

© 2011-2026 Copyright www.ttguide.net