Components
COMPONENTS
ILLUSTRATION
Removal
REMOVAL
PROCEDURE
1. REMOVE INSTRUMENT PANEL LOWER CENTER FINISH PANEL
(See page )
2. REMOVE BLIND SPOT MONITOR MAIN SWITCH (WARNING CANCELING SWITCH ASSEMBLY)
(a) Disengage the 2 claws to remove the blind spot monitor main switch (warning canceling switch assembly). |
|
Inspection
INSPECTION
PROCEDURE
1. INSPECT BLIND SPOT MONITOR MAIN SWITCH (WARNING CANCELING SWITCH ASSEMBLY)
(a) Measure the resistance according to the value(s) in the table below. Text in Illustration
Standard Resistance:
If the result is not as specified, replace the blind spot monitor main switch (warning canceling switch assembly). |
|
(b) Check that the switch illuminates.
(1) Apply battery voltage to the blind spot monitor main switch (warning canceling switch assembly) and check that the switch illuminates. Text in Illustration
OK:
If the result is not as specified, replace the blind spot monitor main switch (warning canceling switch assembly). |
|
(c) Check that the switch indicator operates.
(1) Apply battery voltage to the blind spot monitor main switch (warning canceling switch assembly) and check that the switch indicator operates. Text in Illustration
OK:
If the result is not as specified, replace the blind spot monitor main switch (warning canceling switch assembly). |
|
Installation
INSTALLATION
PROCEDURE
1. INSTALL BLIND SPOT MONITOR MAIN SWITCH (WARNING CANCELING SWITCH ASSEMBLY)
(a) Engage the 2 claws to install the blind spot monitor main switch (warning cancel switch assembly).
2. INSTALL INSTRUMENT PANEL LOWER CENTER FINISH PANEL
(See page )
Customize Parameters
CUSTOMIZE PARAMETERS
PROCEDURE
1. CUSTOMIZE POWER WINDOW CONTROL SYSTEM
HINT:
The following items can be customized.
NOTICE:
When the customer requests a change in a function, first make sure that
the function can be customized.
Record the current settings before customizing.
...
Removal
REMOVAL
CAUTION / NOTICE / HINT
HINT:
When removing the name plates or stripe tapes, heat the vehicle body or tail
gate and name plates or stripe tapes using a heat light.
Heating Temperature
Item
Temperature
Vehicle Body or Tail Gate
40 to 60 ...
Bleeding
BLEEDING
CAUTION / NOTICE / HINT
NOTICE:
Wash off brake fluid immediately if it comes in contact with any painted surface.
HINT:
If any work is performed on the clutch system or if there is thought to be air
in the clutch lines, bleed air from the clutch hydraulic system.
PROCEDURE
1. FILL ...